Racks

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap onto your big-wheeled bike. It's made of tubular aluminum, fits most bikes with disc brakes, hauls up to 55 pounds and has a center strip that acts like a short fender. It's compatible with Topeak's QuickTrack bags and accessories (sold separately), too.

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - Designed for compatibility with disc brakes - 800g - 55lb weight capacity

- Great rack for long distance touring with side bar for additional strength and stiffness - Compatible with all MTX 1.0 and 2.0 bags - T6061 T6 10mm hollow tube alloy construction - Disc mounts allow for mounting to bicycles with disc brakes - 739g - 55lb weight capacity

Traveling light? Go with Sunlite's Gold Tec Lite Rack. Made from lightweight tubular aluminum, the Gold Tec Lite is durable enough for daily commutes, tough enough for cross-country trips and doesn't weigh you down. The top deck has a capacity of up to 45 pounds and side struts support fully loaded panniers. Plus, it fits both road and mountain bikes.

Rack 'em up Turn your ride into a pedal-powered grocery-getter with the BackRack MIK. It is designed to mount to eyelets already built into your frame, so installation is easy. Plus, it has MIK compatibility so you can securely mount MIK trunk bags or accessories in seconds, along with integrated threaded accessory eyelets for added functionality and easy light installation. Product details - Quick and easy install adds storage and utility to compatible bikes - MIK mounting system provides secure, integrated mounting with compatible bags - Integrated eyelets make it easy to mount lights or other accessories - Compatible with MIK, standard trunk bags or panniers - Single-bolt strut mounts allow maximum adjustment and easy installation - Includes required mounting hardware - Max weight capacity 25kg (55 lbs.) Specifications - Size: Small 13-18" (33-46cm); Large 18-22" (54-62cm) - Rack type: Rear racks - Material: Aluminum

The Morse Cargo Cage is designed to increase a bike's carrying capacity. This was created for bikepacking, self-supported races, and rides that just require more gear. The Morse name extends the popular dot-dash mounting pattern that allows for 35mm of vertical adjustment, which is also featured on Wolf Tooth Morse Bottle Cages. It will fit on a fork three-pack mount or anywhere on the frame that has bottle bosses. The Morse Cargo Cage also has bolt mounting points on the angled sides for additional versatility. It is made here in Minnesota, USA from durable, corrosion-resistant 5052 aluminum. - Cage can be purchased with two 20" Wolf Tooth Cargo Straps; straps can also be purchased individually - Designed to fit standard 64mm bolt-spaced 3-pack mounts - Vertical positioning adjustment up to 35mm with Morse dot-dash mount pattern - Mount options in center of cage, as well as on right and left sides; use included spacers when mounting the cage by its side - Designed to fit fork bags, 32 oz. Nalgene bottles, large burritos, and more - Three stainless steel bolts and plastic spacers included - Replacement parts available

The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks). Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg. The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages. The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs. Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs.

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

Genuine replacement parts
Adds utility while still looking great.

Adds functionality. Adds style.

- Compatible with pannier bags
- Max weight capacity 14kg (30 lbs.)
- Includes hardware to connect the rack to the frame
- Includes hardware to connect the rack to the fender
- Not intended for use with child carriers

Increase hauling capacity and add versatility to your bike with the Check-OUT SL Rear Cargo Rack.
The rack includes 3-pack threaded bosses to fasten additional gear to the side of the rack. Use the hook and loop attachments to secure a dry bag or bag of your choosing to the top of the rack.

Features
- Includes frame mounting hardware and linkage
- Threaded 3- Pack bosses for mounting gear to the side of the rack
- Hook and loop bag attachments to secure your load
- Not intended for use with child carriers
- Max weight capacity 10 kg (22 lbs)
- Refer to the Service Manual for assembly & service instructions

Front cargo rack designed for the crown mount-equipped Farley fork. STRAP IN Bolt this custom rack onto your crown mount-equipped Farley fork and carry all your gear. PRODUCT DETAILS - Made of lightweight, durable aluminum - Mounting hardware included - Max weight capacity 7 kg (15 lbs.) - Not intended for use with child carriers

Rear cargo rack designed for the new Farley. BE PREPARED Gear up and go farther with this versatile rear rack. Includes options for mounting panniers on the sides and a bag on top. Custom made for the new Farley, this rack was designed with a dropper seatpost in mind, allowing you to get low on rough terrain and make loaded-down remounts easier. PRODUCT DETAILS - Made of lightweight, durable aluminum - Mounting hardware included - Max weight capacity 25 kg (55 lbs.) - Not intended for use with child carriers

Original equipment replacement parts for your ride. Replacement rack for the aftermarket Fetch+ 2 Front Pannier Kit. PRODUCT DETAILS - Made of lightweight, durable aluminum - Mounting hardware sold separately

Need to haul a little more? These durable, weather-proof panniers are the answer. - 4.5 kg / 10 lbs. carrying capacity per side - 11.2L volume per side - Drain holes stop water from pooling - Includes all installation hardware - Do not exceed a gross vehicle weight (bike, riders, cargo) of 200kg (440 lbs.)

Genuine replacement parts
Adds utility while still looking great.

Adds functionality. Adds style.

- Trek Diamant designed retro rack for 28" wheels
- Does not include stays
- Without spring clip
- Max weight capacity 25kg (55 lbs.)
- Not intended for use with child carriers

Adds functionality. Adds style. - Designed specifically for the 2021-2023 Powerfly FS - Requires specific 2021 Trek Powerfly FS rear full fender to mount - Compatible with MIK, standard trunk bags, and panniers - Does not include mounting hardware - Compatible with 27.5" and 29" wheel Powerfly

Adds functionality. Adds style. - Compatible with 27.5" and 29" wheel Powerfly - Does not include mounting hardware - Confirm compatibility before use

Original replacement accessories for your ride. Genuine replacement parts For OE replacement only. PRODUCT DETAILS - Durable and lightweight aluminum construction - See original bike product page for service manual and install instructions

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity

- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - 800g - 55lb weight capacity

- This one size fits all tubular aluminum rear rack is designed for Fat bikes with disc brakes - Adjustable rack legs fit most 24" & 26" Fat bikes - Integrated side bar provides a lower pannier attachment for more cargo on top of the rack - The MTX 2.0 QuickTrack plate is compatible with any Topeak MTX trunk bag, MTX rear basket, and most other rack packs and panniers on the market - Not compatible with asymmetric rear stay design Fat bike frames - Includes extra-long mounting bracket and rear light mount - Max weight 55lbs - 16.9 x 13.4 x 11.4" - 2.79lbs

A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams

The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independently from the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allows mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags. - Attachments: Fork with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags, RackTime Snapit / Vario system bags - Max Load: 10kg / 22lb - Clamp for front reflector - Size: 37. 4 x 32.2 x 16.5cm / 14.7" x 12.7" x 6.5" - Weight: 910g / 2.01lb

The perfect quick-mount rear rack system attaches to MTB full suspension seatstays or hardtail MTB without rack eyelets. This large rear rack features an innovative top plate that adjusts to level independent of the seatstay angle. Integrated QuickTrack® system allows Topeak TrunkBags / TrunkBox to slide and lock into place and release with the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix® / RackTime® Snapit or Vario system bags. - Strut slot adjustments allow the rack top plate to be level independent of the seatstay angle - Adjustable straps with padded feet securely attach rack to seat stays

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.