Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Brakes/Levers/Pads

$11.51
Externally fitting service parts for Hayes hydraulic disc brake master cylinder
$11.81
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
$12.60
Replacement levers pivots pin kit for Hayes hydraulic disc levers
$13.13
- Prevents pads from becoming dislodged from pistons when transported without rotor inserted in caliper - Sold (10) per bag
$14.77
Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar
$15.75 - $27.30
- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip
$15.75
Hose fittings for Hayes hydraulic disc brakes
$16.80
For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters
$17.62 - $42.00
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
$19.99
These adapter brackets are designed to work with the Post Mount style brake mounts.
$19.99
These adapter brackets are designed to work with the Post Mount style brake mounts.
$21.00
- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip
$21.99
Rebuild kit for Hayes hydraulic disc brakes. - Include pistons, seals, and other parts necessary for service.
$21.99
The parts you need to rebuild one Hayes Dominion A4 caliper. Includes pistons and O-rings.
$23.18
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
$29.78
Replacement lever blade for Hayes hydraulic disc levers - Includes Reach Adjuster
$31.50
- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm
$38.99
Brake Pads for your Dominion A2 come in 2 flavors: Sintered T100 - Sintered metallic friction material provides maximum stopping power in wet and dry conditions. Semi-metallic T106 - Friction material provides enhanced modulation and silent operation.
$38.99
The good friction. Speed and confidence come with better braking. Refresh or update the best brakes in the world with some new pads! Brake pads for your Dominion A4 come in 2 flavors: Sintered T100 Sintered metallic friction material provides maximum stopping power in wet and dry conditions. Semi-metallic T106 (aka free-range organic) friction material provides enhanced modulation and silent operation. Gluten-Free. Includes 2 pads, retention screw.
$38.99
Brake Pads for your Dominion T2 and an upgrade option for Dominion A2. Semi-metallic T106: Friction material provides enhanced modulation and silent operation. Aluminum backing plate for reduced weight.
$38.99
Dominion replacement disc brake pads are used to maintain optimal performance with Hayes disc brakes.
$40.99
Peacemaker Brake Lever Clamp—For Dominion / Shimano I-Spec II
$58.99
Hayes Pro bleed kits include dual syringes and high quality fittings for precise, repeatable bleeds. D.O.T. Brake Fluid Dual Syringe Pro Bleed Kit - Includes 4oz of high performance Hayes DOT 4 brake fluid - Quick connect fittings and dual syringes for an efficient, precise bleed - Bleed fittings for Hayes DOT 4 brakes - Reusable plastic container with locking lid Venom Mineral Oil Dual Syringe Pro Bleed Kit - Includes 2oz of high performance Hayes Venom mineral oil - Quick connect fittings and dual syringes for an efficient, precise bleed - Bleed fittings for Hayes Venom mineral oil brakes - Reusable plastic container with locking lid
$59.99
The D-Series rotor was developed in conjunction with the new Dominion disc brake, designed to provide consistent and reliable stopping power under all conditions. - Proprietary friction surface, optimized for use with Hayes T106 (Semi-Met) or T100 (Sintered) pads to deliver fast, consistent burnish, predictable friction rate, and consistency across temperature and speed conditions - MRC (Modal Resonance Cancellation): Tuned to cancel resonance and vibration, particularly when paired with Hayes T106 (Semi-Met) and T100 (Sintered) pads - 1.95mm thickness enhances heat dissipation - Includes mounting hardware
$60.99
Replacement Lever Blade for Dominion A2 & A4 Brake Kits. Bronze. SFL Option available.
$119.99
Replacement disc brake calipers for Hayes Dominion hydraulic brake systems.
$149.99
Replacement master cylinder lever assembly for Hayes hydraulic disc brakes.
$174.99
Replacement disc brake calipers for Hayes Dominion hydraulic brake systems.
$200.00 - $229.99
Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop! Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance. Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 310g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length
$209.99
Replacement master cylinder lever assembly for Hayes hydraulic disc brakes.
$249.99
Expanding on our award-winning Dominion A4. Our newest brake, Dominion A2, targets Cross Country and Trail riders. Dominion A2 features a two-piston caliper. Dominion A2 includes all the performance from the Dominion A4, utilizing a compact, two-piston caliper. With the SFL option, the Dominion is the ideal brake option for any rider with smaller hands. Hayes product development team set out to design a brake system specifically designed for a smaller ergonomic profile. Dominion SFL maintains all the power and feel of our proven Dominion A4, and accomplishes this using a specifically designed smaller and narrower brake lever. Dominion SFL can be used in conjunction with either our Dominion A2 two-piston caliper or our Dominion A4 four-piston caliper. With optional lever sizes and two caliper choices, Dominion from Hayes Disc Brake now offers a brake that's ideal for your application. Dominion A2 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 303g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length
$249.99
Expanding on our award-winning Dominion A4. Our newest brake, Dominion A2, targets Cross Country and Trail riders. Dominion A2 features a two-piston caliper. Dominion A2 includes all the performance from the Dominion A4, utilizing a compact, two-piston caliper. With the SFL option, the Dominion is the ideal brake option for any rider with smaller hands. Hayes product development team set out to design a brake system specifically designed for a smaller ergonomic profile. Dominion SFL maintains all the power and feel of our proven Dominion A4, and accomplishes this using a specifically designed smaller and narrower brake lever. Dominion SFL can be used in conjunction with either our Dominion A2 two-piston caliper or our Dominion A4 four-piston caliper. With optional lever sizes and two caliper choices, Dominion from Hayes Disc Brake now offers a brake that's ideal for your application. Dominion A2 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 303g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length
$249.99
Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop! Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance. Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 310g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length
$319.99
The best just got better. The limited-edition Hayes Dominion T2 packs the power, sensitivity, and reliability the Dominion family is known for into its lightest chassis yet. Featuring a Reynolds designed and in-house produced carbon-fiber lever, titanium hardware, composite reservoir cover, pads with aluminum backing plates, and precise weight-reducing machining, the T2 is 50g lighter per brake (254g) than the Dominion A2. Key Features: - Tooled Reach Adjustment - Tooled Pad Contact Adjust - Axial Lever Orientation - K2 Hose - Crosshair Caliper Alignment - Composite lever & reservoir cover, titanium hardware Specifications: - Weight: 204g - DOT 5.1 Fluid - Tooled Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length
$17.55
Steel backed disc brake pad with and organic compound. - Fits Zoom Disc Brakes - Steel Back w/ Organic Compound - Qty 1 = enough for 1 wheel
$18.25
Kool-Stop Ebike Compound Disc Brake Pads - Features a ceramic layered steel back plate and organic pad compound - Fits Avid XO Trail/Elixir 7/9 Trail and SRAM Guide Ultimate R/RS/RSC/T
$18.25
Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel
$18.25
Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel
$18.25
- High performance compounds recommended for all-conditions - Steel backing
$18.25
- High performance compounds recommended for all-conditions - Steel backing
$18.70
Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistant braking power. - Qty 1 = enough for 1 wheel
$18.70
- High performance compounds recommended for all-conditions - Steel backing
$22.50
- High performance compound recommended for all-conditions - Alloy backing plate: 50% lighter than steel backing plate
$22.50
With copper plated backing plate and sintered front these Kool-Stop metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. Kool-Stop pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.
$22.50
With copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. Our pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.
$22.50 - $23.99
With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.
$23.95
Kool-Stop disc brake pads designed for use with Shimano disc brakes. - Features a copper plated backing plate and sintered pad compound for extreme conditions like down hill - Compatible with Shimano direct mount BR-RS505/805, Dura Ace BR-R9170, Ultegra BR-R8070/BR-R7070, GRX BR-RX810/BR-RX400, Metrea BR-U5000, XTR M9100, and Tiagra 4770
$34.00
• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound
$12.99
- SLIP RESISTANT & COMFORTABLE - MULTI-TEXTURED GRIP FOR - OPTIMIZED FEEL & CONTROL - UNIVERSAL FIT FOR MOST BRAKE LEVERS - 2 SETS OF LEVER GRIPS INCLUDED
$49.90
Mavic's Exalith brake pads were specifically developed according to their Exalith rim technology to ensure the most consistent and predictable braking in any weather conditions. - Use only Exalith brake pads with Exalith rims. - Available in standard and CXR-specific for Campagnolo or Shimano brakes.
$59.99
This individual left Microshift ADVENT brake only drop bar lever matches other externally-routed microSHIFT drop bar shifters for a clean aesthetic.
$5.99
Odyssey A Brake shoes for all your braking needs.
$8.99
The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt
$8.99
The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex
$13.99
The Springfield lever features an easy to install and remove design. - Easy to install and remove without having to wrestle grips on and off - Die-cast clamp design
$17.99
The 1999 Sidepull Brake is a lightweight brake kit for BMX. - Includes brake, lever and cable - Reach is 66-90mm
$22.50
The Odyssey Medium Monolever is a favorite with its familiar feel, smooth edges and variety of handle options. - Fits 7/8" bars, has a hinged bracket, and does not include cable knarps
$22.50
The Monolever features smooth edges and a clean look. - Fits 7/8" bars, has a hinged bracket, and does not include cable knarps - Replaceable hardware to eliminate stripping
$27.99
The M2 lever works with a single cable or Odyssey's dual cable system. - Includes M2 dual cable, double cable coupler and single cable coupler - Replaceable hardware to eliminate stripping
$34.99
The Odyssey Springfield brake features a one spring design to make brake installation and set up simple and easy. - For rear use only