Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp 11-Speed Freehub Kit for 2013 - Current 188 Hub
$136.00
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
Zipp 11-speed Freehub Kit for 177 Hub
$97.38 - $136.00
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
Zipp 303 Firecrest Carbon Tubeless Disc Brake 700c Rear
$975.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
Zipp 303 Firecrest Tubeless Disc Brake 700c Front
$925.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
Zipp 303 S Tubeless Disc Brake 700c Front
$625.00
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed
Zipp 303 S Tubeless Disc Brake 700c Rear
$675.00
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed
Zipp 77/177 Disc Conversion Caps
$17.10 - $27.00
Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.
Zipp 900 Disc Rear Wheel (Tubular)
$1,607.00
Slippery, record-shattering speed is yours in your next time trial or triathlon with Zipp’s 900 Tubular Disc. Extensive wind-tunnel testing, as well as countless race victories, proves that it excels in all conditions. Zipp's dimpled surface further smooths airflow, while an amazing un-disc-like weight of just 935 grams makes it fast even on hilly courses. Zipp's Carbon Bridge technology weaves Kevlar threads into the rim’s contact surface for improved strength and longevity, while Zipp’s stiff hubs are built on oversize axles for extra stiffness.
Zipp AM Rim Tape
$7.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
Zipp CeramicSpeed Freehub Body and Bearing Kit: 177 SRAM/Shimano Cassette Hub Body
$275.00
- Kits include Freehub body with CeramicSpeed bearings pre-installed for easy installation onto the wheel - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings
Zipp Cognition Freehub Kit
$116.30 - $133.00
Freehub bodies for Zipp Cognition hubs.
Zipp Conversion Kit 11-speed to Track 188 Black
$205.00
Zipp Speed Weaponry Rear Axle Conversion Kits - Converts a road disc into a track disc rear - Fits black 2013 188 V8 disc hubs only - Fits Zipp 900 and Super-9 Discs
Zipp Decal Set
$19.99 - $32.99
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
Zipp Disc Valve Adapter and 5 Patches
$40.00
Accessories to keep your Zipp disc wheels looking good. - 5 replacement valve stickers - Disc valve adapter
Zipp Freehub Kit SRAM XDR for SS 176/177
$100.00
Wheel Freehub Kit SS 176/177 SRAM XDR - End Caps Not Included Compatible With: WH-202-CCR-A1, WH-202-TLD-A1, WH-202-TUD-A1, WH-302-CCD-A1, WH-302-CCR-A1, WH-302-TLR-A1, WH-303-CCR-B1, WH-303-TLD-A1, WH-303-TUD-B1, WH-303-TUR-B1, WH-30C-CLD-A1, WH-30C-CLR-A1, WH-404-CCR-A1, WH-404-CCR-B1, WH-404-TLD-A1, WH-808-CCR-B1, WH-808-TLD-A1, WH-SP9-CC30-A1, WH-SP9-CCD-A1, WH-SP9-CCR-A1, WH-SP9-TUD-A1
Zipp Freehub Kit SRAM XDR for Zipp ZR1
$100.00
Wheel Freehub Kit—XDR Driver Body Kit—Zipp ZR1 Compatible With: WH-202-FTLD-A1, WH-303-F650-A1, WH-303-FTLD-A1, WH-303-FTLR-A1, WH-303-FTUD-A1, WH-303-FTUR-A1, WH-404-FTLD-A1, WH-404-FTLD-B1, WH-404-FTLR-A1, WH-808-FTLD-A1, WH-808-FTLR-A1, WH-SP9-TLD-A1, WH-SP9-TUD-A2, WH-SP9-TUR-A2
Zipp Sapim CX-Ray Straight Pull Spokes and Nipples
$10.80 - $22.99
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
Zipp Super-9 Carbon Disc Tubeless Rim Brake Rear
$2,700.00
How do you make super better? Make it tubeless. Zipp's go-to triathlon and time trial weapon, the Super-9 Tubeless Disc rim-brake wheel, is tubeless ready with a 19mm internal width. That means you can lower tire pressure for a host of benefits: better cornering grip, better compliance, and reduced rolling resistance. With tubeless, you get all this without the risk of pinch flats. So, go attack the course. The Super-9 gives you the technology needed to do your best. The Super-9 Carbon Clincher optimizes supreme aerodynamics, power transfer, stiffness, low weight, and durability. Add to that, the modulation and stopping power of disc brakes, and you're ready to set that PR. - New Zipp graphics and cosmetic identity that screams speed applied with our ImPress direct-print technology - 19mm internal width and tubeless compatibility for optimization of wider tires with lower tire pressure, lower rolling resistance, and increased grip and compliance - Aero, durable, lightweight
Zipp Tangente Quick Release Skewer Set
$47.00 - $84.00
Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp. - Sold in pairs - Stainless steel: 85 grams/set - Titanium: 78 grams/set
Wheels Manufacturing Inc. Axle Spacers
$22.75
Wheels Manufacturing Axle Spacers help you dial in your hub spacing to ensure correct fit and side-to-side spacing in the rear triangle without having to alter the wheel's dish. - Spacers come in bags of 20
Wheels Manufacturing Inc. CN-R081 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech, Joy U, KK 10mm x 1, rear - Compatible with 10mm x 1 axle - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 13.8mm - 1 cone per bag COMPATIBLE HUBS: - Joytech, Joy U, KK 10mm x 1, rear - Taiwanese rear hubs with 10mm x 1 axle
Wheels Manufacturing Inc. CN-R102 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 14.8mm - Dust Seal Diameter: 22mm - Length: 10.6mm - 1 cone per bag COMPATIBLE HUBS: - Tiagra 4400 Front - Shimano Sora HB-3300 Front - Shimano Acera HB-M330 Front - Shimano Nexave HB-T300 Front
WTB TCS AL 46mm Presta Valve
$29.99
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm
WTB TCS Brass 46mm Valve Stems
$19.59
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
WTB TCS Rim Tape
$15.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
Sunlite Axle 3P
$6.99
- Variable widths - Left: 32mm - Center: 52mm - Right: 35mm - Length: 119mm - Overall: 140mm
Sunlite Quick Release Skewer (Front, 133mm)
$9.99
• Replacement aluminum quick release skewers
Sunlite Quick Release Skewer (Rear, 161mm)
$9.99
• Replacement aluminum quick release skewers
Sunlite Quick Release Skewer (Rear, 168mm)
$9.99
• Replacement aluminum quick release skewers
Stan's NoTubes All Mountain 29er Tubeless Kit
$68.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's All Mountain 29er Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Cross Country 29er Rim Strip
$22.99
Stan's Cross Country 29er Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Cross Country 29er Tubeless Kit
$68.99
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Cross Country 29er Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Neo Bearing Kit
$12.50 - $29.00
Replacement bearings for Stan's NoTubes Neo hubs. Includes 2 bearings. - 26mm OD x 15mm ID - 7mm thick
Stan's NoTubes Neo Durasync Freehub
$80.00 - $85.00
Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed. - 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration - Chromed steel bearings - Wide bearing stance and axle design reduces flex and adds durability - Low drag main seal prevents contamination and reduces resistance - Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components
Stan's NoTubes Rim Tape
$13.50 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes Tubeless Valve Stems
$16.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Shimano Dura-Ace R9170 C40 Carbon Tubeless Wheelset 700c
$1,999.99
The lightweight Dura-Ace C40 Carbon Tubeless disc-brake wheelset is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheelset has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim - Tubeless - Center-lock Disc - E-thru axles
Shimano XTR WH-M9000 Race Wheels (29-inch)
$699.99 - $1,499.99
The 29-inch XTR Race wheels offer new UST tubeless, carbon laminated aluminum rims with 20mm internal widths for the lightweight wheelset you need to power both up and down the mountain. • Carbon laminated aluminum tubeless • Super lightweight rim, with same durability as aluminum • 24C rim width • Front 28, Rear 28 butted spokes • New lightweight bearing and axle system • 33g lighter aluminum rear 12mm axle (vs. M988) • Front axle: 15x100mm thru-axle • Rear axle: 142x12mm thru-axle
Shimano XTR WH-M9020 Trail Wheels (29-inch)
$699.99 - $1,499.99
The 29-inch XTR Trail wheels offer new UST tubeless, carbon laminated aluminum rims with 24mm internal widths for the durable yet light wheelset you need for your all mountain ride. • Carbon laminated aluminum tubeless • Super lightweight rim, with same durability as aluminum • Front 28, rear 28 butted spokes • New lightweight bearing and axle system • 33g lighter aluminum rear 12mm axle (vs. M988)
Robert Axle Project Trainer Thru Axle
$54.00 - $54.99
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Reynolds Assault wheel set
$890.00 $1,499.99 - $1,549.99 Up to 43% Off
RIM BRAKE: Rim Material: Carbon Fiber Rim Construction: Swirl Lip Generator (SLGTM) , tubeless ready, Performance Rim 3 (PR3) Construction Technology Rim Size: 700c Rim Width: Internal 17mm, External 25mm Rim Depth: 41mm Rim Weight: 477g Hub: Reynolds Allroads, CNC Machined, 10 degree, 36 points of engagement Spoke Count: 20 Front, 24 Rear Brake Interface: Rim brake only, Cryo-Blue Power brake pads , Brake Wear Indicator Front Axle Spacing: QR 100 Rear Axle Spacing: QR 130 Freehub: Shimano/SRAM 9-11spd or Campy Wheelset Weight: 1515g DISC BRAKE Rim Material: Carbon Fiber Rim Construction: Swirl Lip Generator (SLGTM) , tubeless ready, Performance Rim 3 (PR3) Construction Technology Rim Size: 700c Rim Width: Internal 17mm, External 25mm Rim Depth: 41mm Rim Weight: 439g Hub: Reynolds Allroads Disc, CNC Machined, 10 degree, 36 points of engagement Spoke Count: 24 Front, 24 Rear Brake Interface: Disc Only, Center Lock Front Axle Spacing: 12x100 & 15x100 (Included), QR 100 (Available Separately) Rear Axle Spacing: 12x142 (Included), QR 135 & 12x135 (Available Separately) Freehub: Shimano/SRAM 9-11spd, Campy or SRAM XD-R Wheelset Weight: 1590g
Profile Design 58/TwentyFour Full Carbon Wheelset (Clincher)
$1,200.00 - $1,390.00 $1,200.00 - $1,999.99 Up to 30% Off
Races, training, group rides, gran fondos—Profile’s 58/TwentyFour Full Carbon Clinchers will be your new secret weapon. Their engineers used fluid dynamic modeling and wind tunnel testing to create a super slippery 58mm-deep by 24.5mm-wide carbon rim for maximum free speed that slices right through head and cross winds. Adding mph are the Sapim CX-Ray bladed spokes, which have locking nipples so they stay tight. These wing-like wheels save you massive energy on the flats and they're also light enough to rocket you up the climbs. Plus, Profile's careful hand assembly and advanced carbon layup mean rock-solid stiffness for outstanding power transfer. And, because sometimes you just have to hit the brakes, Profile includes high-tech carbon wrapping and a heat-resistant resin to their rims. Carbon-compatible brake pads come with the wheels so you'll have more stopping power than ever. Upgrade to the 58/TwentyFours and get ready to become a faster rider.
Profile Design 78/TwentyFour Full Carbon Tubular Wheels
$474.99 - $1,249.99
There are no compromises on race day, and Profile Design knew that when they designed their 78/TwentyFour carbon tubular wheels. The 78mm-deep and 24.5mm-wide rim and super stiff carbon layup provide uncompromising go-fast performance. And, the aero shape of the rim slips easily through the breeze, increasing your efficiency and speed. Match these rims up with your favorite tubular tires (sold separately) and experience the high-traction cornering and supple road feel you need to ride to believe. The hubs feature sealed bearings for high-mileage durability and the freehub body is Shimano/SRAM 9, 10, and 11-speed compatible so you can use the drivetrain of your choice.
Profile Design Altair 52 Carbon Clincher Front Wheel
$735.00
Do it all on Profile's Altair 52 Carbon Clincher Front Wheel. A versatile 52mm rim depth provides an aerodynamic advantage you'll notice, yet is still light enough to accelerate quickly around competitors and to take the sprint. For extra speed, Profile has shaped the rim for optimal aerodynamics during real-world cycling conditions because triathlons aren't held in the wind tunnel. Profile's custom hubs and Sapim spokes with hidden nipples add stength and further the aerodynamics. Plus, the Altair's rim is all carbon for weight savings, and since it's a clincher, changing a flat on course is a snap.
Profile Design Altair 52 Semi-Carbon Clincher Rear Wheel
$840.00
Do it all on Profile's Altair 52 Semi-Carbon Clincher Rear Wheel. A versatile 52mm rim depth provides an aerodynamic advantage you'll notice, yet is still light enough to accelerate quickly around competitors and take the sprint. For extra speed, Profile has shaped the rim for optimal aerodynamics during real-world cycling conditions because triathlons aren't held in the wind tunnel. And for additional strength and aerodynamics, Profile's custom hubs are laced with Sapim spokes and hidden nipples. When it's finally time to slow down, the Altair has an aluminum braking surface for sure stopping. And, since it's a clincher, changing a flat on course is a snap.
Problem Solvers Axle Nut
$2.99
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
Origin8 Disc Adapter
$18.69
Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts
Origin8 Tubeless Alloy Presta Valve
$15.29 - $29.99
- AL6061 alloy tubeless Presta valve - Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim - Removable valve core for installing sealant - Additional replacement valve cores sold separately - Sold individually
Origin8 XLT Rim Strip
$7.89 - $9.39
- High-quality fat bike rim strips - Super durable PVC material
Mavic 12 > 9.5mm Rear Axle Adapters
$7.90
On today's MTB frames, there are many diameters and width dropouts standards. Most Mavic wheels can be fitted with specific adapters to match with those frames: 142mm extenders for ITS-4 hubs, 142 mm extenders for TS-2 hubs and QR adapters (delivered with a front quick release) for all of them. - Converts a 12mm rear axle to fit in a frame with 9.5mm dropouts - Requires one pair per hub
Mavic 135 > 142mm Rear Axle Adapters - Crossride
$7.90
On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Mavic Crossride rear hubs with 135mm spacing to fit frames with dropouts spacing of 142mm - One pair of adapters required for each hub to be converted
Mavic Cosmic Pro Carbon SL UST Disc Rear
$1,155.00
This high-performance carbon all-arounder features a new, taller 45mm rim shape that minimizes drag. It also has a wider external diameter (28mm) that optimizes the aero performance of 25mm tires. Add in our UST technology, the most user-friendly tubeless road setup on the market, and a disc-brake specific build, and you have the most advanced, high-performance wheel for speed, puncture resistance, and smooth-riding comfort on the road. This updated wheel-tire system is now engineered with fewer spokes than the previous version (20 compared to 24) and those spokes feature a patented elliptical shape. As a result, overall weight has been reduced 70g with no compromises to stiffness or strength. Made specifically for disc brakes, the front spokes are crossed on each side of the hub to transfer the braking load to the ground without any flexing or wheel wobbling. The rear wheel has Isopulse lacing (radial on the drive side) for maximum power transfer. It's built on the Instant Drive 360 hub, which offers fast freewheel engagement and compatibility with any kind of frame. The wheel-tire system comes with Yksion Pro UST tires that provide a simple, hassle-free tubeless road setup with high rolling efficiency and maximum grip in all weather. Taller, wider rim profile improves aero efficiency - 45mm NACA rim profile, 28mm wide, optimized for 25mm tires, only possible when removing the constraint of the brake track - 20 elliptical spokes (patented) - New slick 12mm front hub Roll faster and smoother with a reduced risk of punctures - No tube, no friction: less rolling resistance and higher speeds - UST Road Tubeless lets you ride with lower tire pressure for a smoother ride quality. - Perfect union between tire and wheel, so installation, removal, and maintenance are easy Disc-brake technology gives added braking control - 20 spokes front and 24 rear for optimized brake torque distribution - Full axle and freewheel compatibility
Mavic Cosmic Pro Carbon UST Disc Front
$1,700.00
Cosmic Pro Carbon wheels have long been a leader in maximizing performance, especially when it comes to maximizing aerodynamics and lightweight properties. New innovations have made it more of an all-arounder, and this UST tubeless disc-brake version delivers incredible all-around performance at a low weight (1650g) and a price that can't be beaten. Engineered with Mavic UST technology, the Cosmic Pro Carbon UST Disc offers all the benefits of tubeless, including less rolling resistance, a smoother ride quality, and a reduced risk of flats. The 45mm deep rims are NACA compliant for low drag and excellent crosswind stability, and their lighter weight results in reduced inertia for explosive acceleration and climbing efficiency. The wheels are engineered specifically for disc brakes, with an optimized spoke count and lacing. The Cosmic Pro Carbon UST is completed with 25mm Yksion Pro UST tires for maximum rolling efficiency, grip, and a smooth, comfortable ride. Lightweight, aero, and efficient - 45mm NACA inspired rim shape minimizes drag for added speed. - Reduced inertia of the lightweight rim delivers instant acceleration. - Mavic Road UST improves rolling efficiency. Versatile performance for all road riding conditions - Minimal drag, low inertia, and high lateral stiffness make it fast and efficient on all types of terrain, from the flats to mountain climbs. Better tire grip and control with reduced risk of flats - Best-in-class tire grip thanks to UST and 11Storm compound - High flat protection thanks to UST and easy on-the-road tire repair - Optimized spoke count, lacing, and hub compatibility for use with disc brakes
Mavic Cosmic Pro Carbon UST Front
$1,700.00
The Cosmic Pro Carbon has traditionally been favored primarily for fast, flat races, but recent improvements have boosted this wheel's versatility. Now, it delivers incredible all-arounder performance at a price that can't be beaten. Engineered with Mavic UST technology, the Cosmic Pro Carbon UST offers all the benefits of tubeless, including less rolling resistance, a smoother ride quality, and a reduced risk of flats. The rims are made using our iTgMax process, which not only minimizes weight but also improves braking performance and reliability, especially on long, steep descents. The 40mm deep rims are NACA compliant for low drag and excellent crosswind stability, and their lighter weight results in reduced inertia for explosive acceleration and climbing efficiency. The Cosmic Pro Carbon UST is completed with 25mm Yksion Pro UST tires for maximum rolling efficiency, grip, and a smooth, comfortable ride. Lightweight, aero and efficient - 40mm NACA-inspired rim shape minimizes drag for added speed. - Reduced inertia of the lightweight rim delivers instant acceleration. - Mavic Road Tubeless UST improves rolling efficiency. Versatile performance for all road riding conditions - Minimal drag, low inertia, and high lateral stiffness make it fast and efficient on all types of terrain, from the flats to mountain climbs. - Best braking efficiency of carbon clinchers thanks to iTgMAX Better tire grip and control with reduced risk of flats - Best-in-class tire grip thanks to UST and 11Storm compound - High flat protection thanks to UST and easy on-the-road tire repair
Mavic Front Road Quick Release
$28.90
Mavic's road quick releases feature a composite lever and Mavic's exclusive cam system. Sturdy and tight, they allow quick and secure wheel fixing.
Mavic ID360 Freehub Body V2
$79.99
Get rolling again with a replacement freehub body for your Mavic wheels. - For Mavic ID 360 hubs
Hope Fatsno 15mm Front Conversion Kit
$33.00
15mm thru-axle conversion kit for Hope Fatsno front hubs.
ENVE SES 3.4 Disc ENVE Wheelset
$2,550.00
What It Is A climbing wheel with an aero advantage designed to be ridden in the mountains and optimized for use with modern disc brake road bikes. Who it's for Road cyclists who require maximum versatility for riding in mountainous terrain and variable weather conditions. Why we made it Since the introduction of the original SES 3.4, we’ve implemented new design concepts across the SES lineup that result in a faster wheel and improved ride experience. The SES 3.4 features road tubeless compatibility, 25mm tire optimization, molded carbon brake track technology, and optimized SES aero rim shaping to ensure maximum efficiencies for a shallow aero wheel. Equally at home in the mountains as in the valleys, the SES 3.4 Disc is the most versatile Smart ENVE System aero wheel. Like all SES wheel models, the SES 3.4 features dissimilar rim shapes and geometries between the front and back wheels to maximize aerodynamic efficiency and rideability in variable wind and weather conditions. The front rim is 38mm deep and shallower than the rear rim to aid in crosswind stability while rear rim is 42mm deep and therefore improves overall airflow.
ENVE SES 5.6 Disc Clincher Chris King Wheelset
$3,000.00
What It Is The ultimate disc brake-specific, aerodynamic, lightweight road race wheelset. Who It's For The SES 5.6 Disc is optimized aerodynamically and structurally for disc use. Road cyclists and triathletes on disc brake bikes will benefit from the SES 5.6 Disc's reduced drag, lightweight design, and rim shape optimized for larger-volume road tires. Why We Made It Most "disc brake" wheelsets are simply repurposed rim brake wheels with disc hubs. The elimination of a braking surface opens up the realm of aerodynamic and structural possibilities. When you don't have to engineer a flat braking surface and manage high temperatures from braking, you can reduce the rim's weight, adjust shape for improved aerodynamics and provide better tubeless performance. Full Details Disc brake technology offers improved braking performance for amateur and professional road cyclists alike. Carbon fiber braking surfaces are a major design constraint that limits weight savings and rim design. By removing the constraints of a braking surface, we can completely rethink the shape of the rim. The SES 5.6 Disc features patented SES rim curvature, but has been further optimized for disc brakes. Additionally, the SES 5.6 Disc carbon fiber clinchers and tubulars are very lightweight, because the material used for rim brake heat management has been eliminated. This allows for a more structurally efficient and impact-resistant rim. Finally, the SES 5.6 Disc carbon clincher is road tubeless-compatible and can still be run with standard inner tubes and tires. Like the current generation SES carbon clinchers and tubulars, the 5.6 Disc has been aerodynamically optimized around 25mm tires.
ENVE SES 5.6 Disc Clincher ENVE Alloy Hub Wheelset
$2,550.00
What It Is The ultimate disc brake-specific, aerodynamic, lightweight road race wheelset. Who It's For The SES 5.6 Disc is optimized aerodynamically and structurally for disc use. Road cyclists and triathletes on disc brake bikes will benefit from the SES 5.6 Disc's reduced drag, lightweight design, and rim shape optimized for larger-volume road tires. Why We Made It Most "disc brake" wheelsets are simply repurposed rim brake wheels with disc hubs. The elimination of a braking surface opens up the realm of aerodynamic and structural possibilities. When you don't have to engineer a flat braking surface and manage high temperatures from braking, you can reduce the rim's weight, adjust shape for improved aerodynamics and provide better tubeless performance. Full Details Disc brake technology offers improved braking performance for amateur and professional road cyclists alike. Carbon fiber braking surfaces are a major design constraint that limits weight savings and rim design. By removing the constraints of a braking surface, we can completely rethink the shape of the rim. The SES 5.6 Disc features patented SES rim curvature, but has been further optimized for disc brakes. Additionally, the SES 5.6 Disc carbon fiber clinchers and tubulars are very lightweight, because the material used for rim brake heat management has been eliminated. This allows for a more structurally efficient and impact-resistant rim. Finally, the SES 5.6 Disc carbon clincher is road tubeless-compatible and can still be run with standard inner tubes and tires. Like the current generation SES carbon clinchers and tubulars, the 5.6 Disc has been aerodynamically optimized around 25mm tires.
Page 1 of 8 Next page