Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.
XLAB's Aero Cage Optimizer is a cool little device that mounts onto the bottle mounts on your frame or aero-bar or rear hydration system. Once in place, it lets you adjust your cage up, down, forward or backwards up to 1.75 inches so that everything fits and works the way you want it (cages sold separately).
Replacement Spare Bottle for Aero TT System - BPA free - High grip sides - Aero-weenies rejoice with 50% less drag than round bottles - Ideal 20oz (590ml) capacity for a gel/water mix - Save up to 64 seconds on Full Race distance - 20 oz (590mL)
XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.
Low-cost nylon composite mount with NEW Italian-made cage. Featuring 60% more grip force than original model! - Single bottle system neatly tucks one bottle behind your saddle for easy access to hydration - Perfect location for an extra bottle when taking on longer training rides or Century rides - Mounts low to not hinder your ability to get on and off the bike - Carry repair kit with XLAB Multi-Strike Repair Holder Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Low mounting position provides enough clearance to easily swing your leg over the saddle - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping XENON cages tout approx 8lbs (3.6 kg) cage grip force – within the ideal range of rear system grip force for worry-free bottle retention - Strong, sturdy mount prevents swaying, rattling and vibration Easy storage upgrades readily available - Add an XLAB Multi-Strike Repair Holder – a compact storage bracket that sleekly mounts behind the cage! - Multi-Strike Repair Holder easily carries a clincher repair kit – tube, tire levers, XLAB Air Strike CO2 Cartridges and XLAB inflator. It can also carry a full tubular setup including tubular tire and inflating foam sealant.
Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The Delta 200 mounts on the saddle rails for no measurable drag. Our most popular single rear carrier includes Xlab's Gorilla XT carbon cage which provides a tight 14-pound grip on your bottle. It mounts to most standard metal-rail saddles (for carbon rails, purchase the optional Delta Adapter). For a complete system, purchase the optional X-Strike Inflation Kit and store up to 4 CO2 cartridges.
Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The Delta 220 mounts on the saddle rails for no measurable drag. The Delta 225 was specially designed for ISM Adamo saddles with a transition hook. The system includes a Gorilla XT carbon cage which provides a tight 14-pound grip on your bottle. Mounts to most standard metal-rail saddles. For carbon rails, purchase the optional Delta Adapter.
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
Lightest and stiffest adjustable rear carrier designed specifically for ISM PN 3.0 and PN 3.1 saddles Features and Benefits - Mounts to saddle, hiding in body's draft. - Aerodynamic location: Can adjust cage angle and cage height for a perfect custom position. - Stable design: Stiffest mount on market with alloy arms. - Flared cage design: Makes inserting bottle easy. - Highest gripping cage: Gorilla Cage has (approx) 10lbs grip on bottle to prevent bottle launches. - Anti-vibration: Locking hardware for safety and security - Compatible with ISM Adamo saddles with transition hook, Adamo Attack and PN 1.1 models - Repair storage options: Compatible with Aero Pouch 300 bag or Multi-strike Repair Holder.
Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The Delta Sonic mounts on seat posts which have a 10mm horizontal hole at the back. The rod installs into the seat post for a sturdy, solid system. The system includes a Gorilla XT carbon cage which provides a tight 14-pound grip on your bottle.
Strong and original 10mm Horizontal Hole Seat Post Mount. One size fits most. Includes high-gripping Gorilla Cage. - Highly adjustable to your saddle position and riding style - Tucks neatly behind to streamline rear drag into clean airflow - Sturdy design eliminates irritating bounce and sway - To hold repair kit use XLAB Multi-Strike Repair Holder or XLAB Aero Pouch 300 Highly Compatible to Suit Various Saddle Positions - Whether your saddle is positioned far forward or back, the Delta Sonic ML has 3.25" (82.5mm) of adjustability to suit most riding styles Aerodynamic Location - Bottle tucks in closely behind the saddle, hiding in the rider's draft to produce a clean airflow - Designed in conjunction with Cervelo wind tunnel tests Reliable, Sturdy Design - Strong, stainless steel mount eliminates swaying and bouncing - On bumpy courses, your bike can produce a seesaw effect, easily ejecting loosely-held bottles. XLAB's highly regarded Gorilla Cage is designed with tall sides and superior 10lbs bottle grip (approx), coupled with a flared design making bottle insertion/removal easy - Innovative Vee Clamp locks mounting rod in place while reinforcing seat post support - Weight: 151g (5.3oz) for entire system - Construction: Rod: Stainless steel; Cage: Carbon - Rod Adjustability: 3.25” (82.5mm) - Compatibility: Select Cervelo, Scott, Kestrel, BH and Fuji models. Includes: - DELTA SONIC ML Rod - GORILLA CAGE - VEE CLAMP - All Hardware and Installation Instructions - Warranty: - Rod: 3 Year Limited Warranty
Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The Delta Sonic XL mounts on seat posts which have a 10mm horizontal hole at the back. The Delta Sonic XL allows for a rear seat position and is 0.8" longer than the standard Delta Sonic. The rod installs into the seat post for a sturdy, solid system. The system includes a Gorilla XT carbon cage which provides a tight 14-pound grip on your bottle.
XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.
XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.
Torpedo innovation meets vertical bottle design. Brand new 28-ounce (828mL) hydration system with minimal frontal area. Includes composite mount and clamps, splash-proof lid over quick-fill opening, straw with bite valve, and Hydroblade bottle. All-in-one system for one great price! The Hydroblade is for casual mountain biking with front suspension forks. The most convenient, complete vertical hydration system available. - Safer riding - no reaching down for your bottle - Easily refuels. Simply lift lid and fill using wide mouth, quick-fill opening - Bite valve keeps straw full for quick drinking - Comes complete with easy clip-on clamps for triathlon and TT Bars - Mount the Hydroblade on MTB, fitness, drop or flat bars using the Hydroblade Universal Mount, available separately. - Fits widest range of bars – 80-160mm (center-to-center) Easy to Drink and Refill - Hands-free drinking. Simply sip from the straw, keeping your eyes on the road ahead. - NEW ClickCover! ClickCover designed with grippy pull-tab for opening. Simply pop open and refill via Split Cap. Insert bottle nozzle into aperture for fast, quick refill. - Comes with two cap styles! System also includes highly-acclaimed classic Torpedo Clear Cap. Wide mouth, quick-fill opening also makes mid-ride refill of tablets or powder a breeze. - Top-of-the-line bite valve decreases bloating by reducing air intake when sipping - Flat bottom allows bottle to stand upright on counter when filled Clean, Aerodynamic Design - Computational Fluid Dynamics (CFD) optimized aerodynamic shape to minimize system drag - Flow straighteners molded in for added drag reduction Highly-Acclaimed Megadjust Mounting - Securely adjusts to widest range of cockpit configurations 80mm-160mm (center-to-center) - Accommodates up to 20° of aerobar extension rotation SecureClip Brackets - Clips onto aerobar extensions for a clean bike aesthetic. Eliminates need for extra zip-ties, rubber bands or electrical tape to prevent rocking or tilting - Fits 22.2 diameter aerobar extensions
Easily mount your Hydroblade bottle to virtually any bike! Mount on MTB, fitness, drop or flat bars! Fits on any bike with a 31.8mm diameter handlebar. The Hydroblade is for CASUAL mountain biking with front suspension forks. Easily mount your Hydroblade bottle to virtually any bike! - Mount the Hydroblade Bottle on MTB, fitness, drop or flat bars! Fits on any bike with a 31.8mm diameter handlebar - Easily swap your Hydroblade Bottle between bikes with no tools - No slipping or vibrating - mount is designed with hold-tight rubber grips and anti-vibration Loctite - Adjustable bottle angle to fit all handlebar tilts and configurations Easily Mounts on any Bicycle - Secure 4-Bolt installation with anti-vibration Loctite. - Simply undo the silicone strap on your Hydroblade Bottle and pop it into the Hydroblade Universal Mount. - Mount uses the same silicone strap to keep bottle secure and tight! - For 25.4mm handlebars, we recommend The Kore 31.8 - 25.4mm handlebar shim. No Slipping, Sliding or Rattling - Stiff and light mount keeps bottle in place. - Recommended for all road, gravel and fire road surfaces. - Weight: 100g - Construction: Nylon Composite - Handlebar Compatibility: 31.8mm (for 25.4mm handlebars, we recommend The Kore 31.8 - 25.4 handlebar shim) - Mounting Width: Requires 12.5mm (½”) clearance on each side of the stem - Warranty: 3 Year Limited Warranty
Having trouble getting your bottle out of your cage? Upgrade to XLAB's Sidekick Carbon Cage! It's specifically designed for use with aero frames, tri bikes and other rigs with small front triangles. Plus, its side-loading design lets you slip your bottle in and out at a comfortable angle so you won't have to struggle with a stuck bottle ever again. It's also crafted from carbon for an impressive weight of only 34 grams. And, it boasts a whopping five pounds of grip force so it keeps bottles in place over even the roughest pavement. - Ideal for fastest frame bottle access and for small frames - Low cut sides for rapid bottle removal and insertion - Wide center opening permits sides to flex outwards for easy bottle withdraw - Special flared entry lip for fast bottle access and insertion - Long thick lower shelf prevents large heavy bottles falling through cage bottom or breaking off tab - Matches XLAB Gorilla cages rear carrier Anti-Launch, and Chimp cages
• Complete packaged system containing all essential items for training and Sprint race distances • Includes the key items for training • Includes essentials you need for short triathlons • Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: • TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. • STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes • NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation • AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
XLAB's Torpedo Carbon Cage is designed specifically for their horizontal aero bar hydration mounts. Use with a standard bottle or XLAB's new Torpedo model (mounts and cages sold separately). The cage is made of ultra-light carbon, holds bottles securely and is super easy to use. It features a 5-pound grip force on bottles so they stay put over even the roughest roads.
Compact, all-in-one design fuses hydration and data needs into one easy-to-use system. Design moves bottle weight over the stem to preserve aero cockpit space. Intuitively placed computer mount positions data right where you need it. High-grip design for secure bottle retention. Installs in an instant without cable-ties or tools. - Includes 25oz (740mL) XLAB Aqua Shot bottle. - Adjustment Width: 75-150mm - Weight: 7.9oz (225g)
$49.95 - $59.95
Keep your hydration right between your arms and your computer at a glance. Easy-to-install system stacks hydration and ride data into one simple design. - Upgraded computer mount takes on rougher road conditions. 3X stiffer than original Kompact 100. - Just add your choice of beverage: Includes calibrated, squeeze-and-squirt Aqua-Shot Racing Bottle - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubberbands or electrical tape needed to secure system: SecureClip brackets simply 'clip on' and Velcro down to aerobars - On top Garmin and Wahoo computer mount gives quick-glance bird's-eye-view of your cycling data - High-grip design holds bottles tight – yet bottle insertion and removal is easy All Inclusive System - Comes with everything you need – mounting plate, Garmin and Wahoo computer mount for Garmin bike computers or multisport watches, cage and bottle No-Fuss Installation, Comes Fully Assembled - No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply clip-on and Velcro-down - Clean, 'snap' on XLAB SecureClip brackets eliminate rattling and shifting - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface, and Wahoo bike computers Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Reversible design easily allows for repositioning if you'd rather pull the bottle towards you than away. - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Easy Glide Cage Design - Specially designed side cutouts enable fast bottle withdraw and entry. Available in black or red Drink Fast with Self-Sealing Nozzle - No need to open bottle nozzle with your teeth. Simply stop squeezing and the nozzle seals itself. - Compatibility: Wahoo and GARMIN-specific - Capacity: Includes 25oz (740ml) clear AQUA-SHOT bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 177g (without bottle or computer) - Length: 145mm/5.7 inches - Bottle Grip Force: 4lbs Construction - Bottle: Clear, lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Aluminum Alloy - Cage: Nylon Composite VULCAN CAGE - Brackets: Nylon Composite with Velcro Straps coated with non-slip extension grip Warranty: - 2 Year Limited Warranty
Introducing XLAB's latest generation of their Torpedo Mount, the Torpedo Mini Mount Aluminum. XLAB's Torpedo Mount lets you carry hydration and computers on your aero bars and actually reduces your aero drag, too! The Mini is narrower to accommodate the trend to running aero extension bars closer together, and it's longer to support XLAB's new horizontal Torpedo bottle (sold separately). Plus it offers high adjustability for easy fitting. Best of all, a designated slot up front allows you to position your computer for easy viewing. No more looking down to see your data! Go with the originators of the horizontal bottle mount; choose the experts: XLAB!
Contains all of the essential spare parts to freshen your Torpedo. - Includes: 2 Refill Lids, 2 Straw Plugs (Clear Solid and Black Slotted), Straw with Drink Valve and Dolphin Tail Screw.
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
Spare Bottle Chassis for Versa 200 & Versa 500. Comes in sealed bag with 1 breather valve pre installed.
XLAB's Torpedo System 400 is the cutting-edge of aerodynamics, combined with ultra-light design and state-of-the-art ergonomics... your ultimate hydration system is here! The 400 is XLAB's top of the line refillable BTA system. You can fold the straw with 2 different positions and have your computer in front of the system in easy, line of sight to keep your focus on the road ahead. The System includes XLAB's carbon Torpedo cage, carbon Torpedo Mini Mount, Aero Computer Mount, 2 Lids, Straw and Bite Valve and all necessary hardware. It's vertically and horizontally adjustable and aerodynamically, it's invisible!
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)
• KEEP LIQUIDS COOL - Silver exterior reflects heat away keeping liquids 25% cooler • FULL INSULATION - Bottle (sold separately) is completely covered for maximum insulation • INSULATED STRAW COVER - Keep liquids in straw cool for instant refreshment • EASY INSTALLATION - Simple install and removal for bottle cleaning • FOLDING STRAW ABILITY - Fold straw for optimum aerodynamics • PREMIUM MATERIAL - Full 3mm low-friction smooth skin insulating neoprene • Compatibility: Fits TORPEDO SYSTEM 50, 100 & 400 • Material: Neoprene • Weight: Bottle cover: 41 grams, Straw cover: 10 grams • Includes: Bottle cover, Straw cover, Instructions
$18.99 - $24.99
The only thing better than fresh water on a long, hot ride is cold fresh water-that stays cold. Voda Ice is an insulated water bottle that keeps your water cold for longer and comes in a game-changing 28-ounce size that lets you carry more of it. The premium Flow Top cap and No-Drop Grip Ring give this bottle a great in-hand feel with easy-squeeze hydration. - A premium insulated bottle that keeps water cold, feels great in-hand, and provides leak-free closure - Form fit insulation layer keeps water cold twice as long as traditional bottle - Flow Top cap's heart valve and soft-touch poppet offers easy-squeeze hydration - Secure threaded cap with easy open-and-close poppet locks down leaks - No-Drop Grip Ring provides a grippy texture for confident grasp even when wet - Designed for easy cage entry and removal with secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates
Page 1 of 10 Next page