The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
Bigger and Stronger for a Better Ride Featuring an improved ride feel and more accurate power measurements, this smart bike trainer has everything you need for an enjoyable and efficient indoor training session. - Ride hard. This trainer can handle sprints up to 2,000 watts. - Work up a sweat with inclines up to 16% that hold up to your most serious sprints. - Accuracy matters. Measure your power to within 2.5%. - Keep crushing it with your favorite apps, including Zwift and Tacx. - Finally, a trainer that won’t wake the whole house when you ride hard. ACCURATE AND RELIABLE This trainer is redesigned to let you track your performance and progress with reliable, consistent measurements. That includes power, speed and cadence, measured accurately within 2.5%. READY TO SPRINT The well-balanced design and large footprint of the FLUX 2 Smart trainer ensures maximum stability, even during the most explosive sprints, up to 2,000 watts. CLIMB HIGHER Get the most out of your intense workouts by training on realistically simulated inclines up to a 16% gradient. A MORE REALISTIC RIDE At 16.8 lbs (7.6 kg), a heavy flywheel ensures a realistic ride feel and good responsiveness. SMOOTH AND SILENT This direct-drive trainer is designed to bring vibration and noise levels to the absolute minimum, resulting in one of the most silent flywheel-equipped bike trainers available. IMPROVED COMPATIBILITY The trainer comes with additional axle adapters to significantly improve the axle compatibility. It is compatible with 142x12 mm and 148x12 mm axles — right out of the box. HIGHLY COMPATIBLE The FLUX 2 Smart trainer communicates via BLUETOOTH Smart technology and ANT+ FE-C protocol, so it works with a number of popular training apps such as TrainerRoad and Zwift. ABLE TO STAND ALONE You can opt to use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance. DEVICE COMPATIBILITY Connect FLUX 2 Smart to multiple devices simultaneously, so you can enjoy Tacx software and track your performance on your Garmin bike computer at the same time. TACX TRAINING SOFTWARE Enjoy a library filled with more than 100 high-quality, real-life videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Milan. TACX TRAINING PLANS Take advantage of structured training plans, designed for your fitness level to help you meet your goals. Race live opponents, upload GPS data, ride with 3-D maps and more.
The NEO Smart offers the best in power and intelligence and is the quietest indoor trainer currently available on the market. The lack of any physical transmissions means this is the first true direct drive. Road feel is simulated in a highly realistic manner, there is no loss of power. The powerful motor is able to apply resistance up to 2200 Watt and simulate slopes realistically up to 25%. It also speeds up during descents. This ensures the most realistic cycling experience, also during climbs. The lack of any physical transmission, and in turn any parts that could rattle or rub against each other, ensures this trainer is extremely quiet. In addition, this trainer requires no calibration and suffers no wear and tear. Just like other Smart trainers, the NEO communicates using ANT+ and Bluetooth Smart, allowing it to be connected quickly and easily with Tacx apps. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the NEO Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. Furthermore, the Tacx NEO features Plug in/Plug out technology and can therefore be used with and without a plug. When the plug is not in use, the trainer will act as a wireless motor brake. This means the trainer will be not be able to speed up during descents. So you can use this trainer anytime and anywhere, even when you don’t have your smartphone with you. -Software Tacx apps & Third party apps. PC software via upgrade. -Operation Automatic -Resistance unit Direct drive -Realistic slope 25% 1 -Descent simulation To -5% -Max brake power (10 sec.) 2200 Watt -Mass inertia 125 kg 2
- Heavy-duty nylon toe straps with classic style steel buckles - Narrow design fits most cage style pedals - 460mm length
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
A Killer Training Combo What happens when you pair a speed sensor with the #1 selling bike trainer in the USA? You get a combo that’s ready for any virtual—or non-virtual—training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Rouvy and Zwift, without a traditional smart trainer. Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid2 trainer with our innovative club knob, connect to your virtual training app of choice via Bluetooth or ANT+, and voilà! - you’re ready to sweat. Product Features - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Included speed sensor connects you with Rouvy, Zwift and other indoor cycling apps. - ANT+ USB and BlueGiga USB sold separately. - Includes one month subscription to Rouvy virtual training app In the box: - Fluid² Smart Equipped Bike Trainer - Dual-band magnetless speed sensor - Fluid² is the best-selling trainer in the USA. - Fluid resistance unit creates optimal road-like feel. - Fluid resistance unit provides a quiet and consistent ride. - Noise level at 20 mph is super quiet 64-68 decibels. - Large, individually precision-balanced flywheel allows for improved road-like feel. - Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Comes on the foldable Classic frame with spring loaded, bolt-action lever. - Precision-machined alloy roller reduces tire wear and slippage. - Features clutch knob for perfect roller-to-tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes – up to a 2.0 tire. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm. - Trainer tire recommended. - Compatible with indoor cycling apps. - Trainer is tested to the combined weight (rider and bike) of 300 lbs. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes. - ANT+ USB and BlueGiga USB sold separately. - Formerly branded as CycleOps Fluid² Smart Equipped
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
The NEO Track replaces the front wheel support of the NEO and enables you to steer freely in the Tacx Trainer software 4, Advanced (Windows PC). The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to decide yourself where to go to when training in virtual worlds. The NEO Track is only suitable for the NEO Smart in combination with the Upgrade Smart (Tacx Trainer software 4, Advanced and ANT+ antenna required). - Communicates wirelessly with the computer via ANT+ - Rubber caps on the bottom prevent sliding and reduce noise - Foldable, lightweight and easy to store
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.
Replacement roller belt for Tacs roller trainers.
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
The Saris 20/24-inch Wheel Adapter allows you to use your BMX or recumbent bike with your trainer.
Take on any race, club ride, or weekend adventure with confidence. When you add Saris rollers into your training routine, you'll increase your balance, control, and ability to ride a straight line — all of which translate to more efficiency, power, and technique on the road. And, because you have to pedal 100% of the time to balance your bike, you get an amazing workout, no matter your pace. - Improve balance, control, and ability to ride a straight line. - Aluminum roller drums run silently and smoothly. - Precision-lathed 3.25" aluminum roller drums won't distort in heat or sunlight. - Fold flat or stand on end for convenient storage. - Designed for both indoor and outdoor use - 16" wide wheel base fits just about any size of bike and allows plenty of room to move around. - Rubber foot pads ensure that the only thing moving on the rollers are the drums, providing a secure, sturdy ride. - Durable steel-frame construction - Adjustable belt for right and left dismount - Resistance Roller uses zero moving parts to deliver quiet magnetic resistance. - Maximum wheelbase 44.5" (axle to axle) - Minimum wheelbase 37.5" (axle to axle)
Reliable. Durable. Quieter Than Ever Before. When it comes to indoor bike trainers, the most frequently asked question is: how quiet is it? Taking this to heart, our Madison, Wisconsin-based team put this query under the microscope and set a goal to build a trainer so quiet, that the only sound is that of your drive train. The result? A direct drive smart trainer that touts a sound specification of 59 decibels at 20 mph. In other words, the H3 is five times quieter than previous generations, making it the quietest smart trainer to ever leave our doors. Following the Saris direct drive smart trainer legacy, the H3 features the same reliably and durability as its predecessors. Each H3 is made from cast and machined aluminum sourced from America’s heartland. Encased inside are components meticulously calibrated to measure power, speed and cadence, as well as a precision-balanced flywheel - all built to handle 2000 watts and replicate a 20% climbing grade. Tested to withstand heavy training, the H3’s internal cooling system will keep the electromagnetic resistance system working – and accurate – long after your legs have given out. - Quieter Than Ever: all new drive system shaves decibels off previous generations. - Precise Training: +/- 2% power accuracy. - Controlled and Consistent: electromagnetic resistance provides a measured workout every time. - Direct Drive Design: widest bike compatibility and eliminates wheel slips. - No External Sensors Required: measures speed, cadence and power. - Seamless Integration: connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards. - Zwift certified. Specs - Noise level: 59 decibels at 20 mph - Power measurement accuracy: +/- 2% - Maximum power output: 2000 watts at 20 mph - Simulates a 20% climbing grade - Fast response electromagnetic resistance - Measures speed, cadence and power – no external sensors needed - 20 lb precision balanced flywheel - Integrated dual ANT+ FE-C and Bluetooth FTMS standards - Built-in front wheel block - Integrated carrying handle - Compatible with Shimano 8-11 speed cassettes - XD/XDR freehubs sold separately (link) - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Compatible with a wide variety of devices and indoor cycling applications, including Rouvy, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2 (link). - LED indicator lights communicate connectivity and more. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Internal cooling technology ensures accurate ride data even during the hardest of workouts. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates and calibration via the Saris app (link to firmware page) - Maximum weight (rider and bike): 300 lbs. - Dimensions when Open L*H*W: 31x18.5x19.5 inches (787.4x469.9x495.3 mm). - Dimensions when Closed L*H*W: 8.5x18.5x19.5 inches (76.2x469.9x495.3 mm). - Weight: 47 lb. (21.3 kg). - Cassette sold separately.
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
Designed to get you “out” for a ride for those times you simply can’t get out. Whether you’re craving a technology-free trainer session or a ride with your virtual crew, the Mag Smart Equipped can help you tally the miles. Our easy-to-store, foldable trainer frame features an adjustable linear resistance unit with five levels and comes with a speed sensor that can be used for any virtual – or non-virtual – training ride. For use with your favorite indoor cycling app, install the speed sensor on the rear wheel of your bike, mount your bike to the Mag bike trainer, connect via Bluetooth or ANT+, and prepare to sweat. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Included speed sensor connects you with indoor cycling apps
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
Trainer Mission Control Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland. And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one. - Stay Charged: built-in power strip keeps training necessities nearby and powered up. - Pick Your Height: adjustable for wide range of bikes and training configurations. - Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride. - Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing. - Enhanced Experience: a great addition to indoor training. Specs - Base: 13-inches wide x 36-inches Depth - Desk Top: : 12-inches Width x 20-inches Depth - Adjustable Desk Height from Floor: 40- to 55-inches - Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware - Cord Length: 6- foot AC cord - Built-in power strip with 2 AC and 2 USB outlets - Built-in cord retention clips for easy cable management and a clean look.
Everything you need for the best indoor trainer experience possible. - Can be used across a wide range of trainer setups. - Includes Trainer Mat, Climbing Block and Saris towel.
Page 1 of 2 Next page