Filter By:
Workstands

$668.99
- The PRS-2.3.1 is a professional quality double arm repair stand designed and built to withstand the rigors of everyday shop use.
- Includes two 100-3D Micro Adjust Clamps (clamps tubes up to 3", fully adjustable clamping pressure, narrow 2.7" clamping jaws)
- Clamps two bikes simultaneously
- Clamps rotate 360 degrees horizontally and vertically
- Heavy gauge, chrome plated steel tubing for rigidity and years of trouble free use
- Clamping height easily adjusts from 50" to 62" (128cm to 158cm) using heavy duty lock block and locking pin system
- Includes aluminum work tray
- #135 Steel Base Plate sold separately
- Use FP-2 Floor Mounting Plate to mount stand directly to floor (sold separately)

$529.99
Perfect for the mechanic on the go! Our Bike Gator portable bike repair stand folds down small for easy transport and is easy to assemble once you're at the venue. We offer it with the same clamps as our shop-based Pro model stands, so no matter your preference there's a stand for you. Despite its low weight at 5.7kg it has a capacity of 30kg, so even those of you working on downhill bikes or tandems can make use of this bike stand.
- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts
- Maximum load capacity is 30kg
- Weight of the stand without tool tray is 5.7kg

$499.99 - $529.99
- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts
- Maximum load capacity is 30kg
- Weight of the stand without tool tray is 5.7kg

$554.99
- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts
- Maximum load capacity is 30kg
- Weight of the stand without tool tray is 5.7kg
- The stand features a new array of precision aluminum and steel parts which offer stiffness and durability
- NEW Jaw mount and rotation system
- Stand is adjustable by height between 980 and 1500mm

$59.95
Topeak's FlashStand is a super work/display stand that folds up to become extremely portable as well! This affordable two-footed wonder supports your bike at the bottom bracket and down tube and raises the rear wheel with two adjustable-height feet. Take it along in the trunk of your car to dial-in your ride before your next adventure!

$319.95
A pro-level work stand with a built-in closable small parts bin. Stable tripod design folds down small for travel or use at the races. Additional clamp lever for tightening/releasing the clamp with ease.
Clamp Head: Non-marring rubber jaws, 360° rotation
Clamp Height: 107cm to 178cm (42" – 70")
Clamp Opening: 1.9cm to 4.5cm (0.75" – 1.8")
Folding: Two QR clamps
Base: HD folding 6061 T6 tubes
Max Weight Capacity: 25kg / 55lb
Added Features: Carry bag, Rubber base feet, Clamp lever, Closable small parts bin
Size: 17.8 x 117cm / 7.0" x 46.0" (Folded); 135cm / 53.1" (Base Diameter)
Weight: 6kg / 13.23lb

$399.95
A pro level workstand with a built-in digital weight scale. Stable tripod design folds down small for travel or use at the races. Additional clamp lever for tightening / releasing the clamp with ease.
Clamp Head Non-marring rubber jaws
360° rotation
Digital weight scale
Clamp Height 122 cm to 183 cm
(48” - 72”)
Clamp Opening 1.9 cm to 4.5 cm
(0.75” - 1.8”)

$169.99
- Clamp can be positioned at 5 directions.
- Adjustable in height, 105 - 150 cm.
- Max load: 50 kg

$199.99
- Clamp can be adjustable height from 106 to 144 cm.
- No tools required to set up for bike maintenance or fold for storage.
- Made of aluminum for lightweight.
- Weight: 6.18 kg.
- Max load: 35 kg.
- Tools are not included.

$299.99
Features:
- Velcro fastener secures frame to bottom bracket cradle.
- Plastic bottom bracket cradle won’t harm bike’s finish.
- Carry bag, tool tray and wheel hook are included.
- Very easy to open, stable tripod base folds for storage.
- Ideal for heavy-duty work.

$14.95
Park Tool's 106-AC easily adapts the #106 Work Tray or PTH-1 Paper Towel Holder to fit 35mm-37mm upright tubes on PCS-9 Repair Stands, as well as 2003 and newer PCS-1, PCS-4, PCS-4-1, PCS-4-2 Repair Stands.

$209.52
Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-9C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing.
- Fits PRS-6, PRS-7, and PRS-8 stands made before 6/96
- Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm)
- The clamp jaws are nominally 4 inches (10cm) wide
- Uses 468B jaw covers

$211.06
Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-3C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing.
- Fits all generations of PRS-2, PRS-3, and PRS-4 stands, and PRS-5 stands manufactured before 6/96
- Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm)
- The clamp jaws are nominally 4 inches (10cm) wide
- Uses 468B jaw covers

$239.95
Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality solid cast-aluminum Adjustable-Linkage Clamp that boasts durable, protective and replaceable vinyl jaw covers. The clamp holds seatposts and frames from an inch to 1 5/8 inches in diameter and there are slots for cables, too. Plus, this stand rotates 360 degrees for optimum bike positioning.

$189.95
Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas like on seatposts that aren't raised much. This stand rotates 360 degrees for optimum bike positioning, too.

$369.95
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface.
- Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm)
- The clamp jaws are nominally 4 inches (10cm) wide
- Clamping height can be raised from 6.5" to 16.25" (92cm to 41cm) above the bench surface
- Clamp rotates 360 degrees
- Heavy gauge steel tubing
- Chrome plated for durability

$362.95
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface.
- The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes
- The clamp jaws are nominally 2.75 inches (7cm) wide
- Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface
- Clamp rotates 360 degrees
- Heavy gauge steel tubing
- Chrome plated for durability

$429.95
Park Tool's Deluxe Home Mechanic Repair Stand is a heavy-duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock-solid, four-point leg system that folds together for storage, steel powder-coated tubing, and a composite horizontal tube.
• PCS-4-1 uses the 100-5C Adjustable Linkage Clamp.
• Clamp rotates 360º and is adjustable in height up to 67” (170cm)
• Adjusts quickly from 55" to 72"
• Approximate weight 26 lbs (11.8 kg)
NOTE: The maximum weight holding capacity of the PCS-4 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.

$283.95
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Adjustable Linkage model, which feature's replaceable rubber jaws; fits seatposts and frame tubes from 1 to 1 5/8-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

$269.95
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

$35.95
Permanently and securely attach your Park Tool Repair Stand (sold separately) to the floor of your shop with Park's Floor Mounting Plate. Made with an 8" square of steel, it attaches to the stand with four bolts, which are included.

$193.95
Park's Home Mechanic Wheel Truing Stand allows extremely accurate and reliable wheel truing and even building at an economical price. It's constructed from heavy-gauge steel and works with most wheel sizes and hub widths. It can be bolted to a bench for additional stability.

$184.99
Mount the THS-1 Trailhead Workstation (sold separately) directly to this rigid steel post.
Features:
- 2-inch (5cm) square post plated then powder coated for long outdoor life
- Includes THS-1 mounting fasteners
- 6-inch (15cm) square base with holes to mount directly into hard surface or to Park Tool #130 Base Plate (fasteners not included)
- Height: 62.25-inch (158cm) positioning cradle arms at 50.5-inch (128cm)

$179.95
A bench-mounted version of our popular PCS-10.2 Deluxe Home Mechanic Repair Stand. Features our world-famous cam-actuated micro adjust clamp design, which securely holds bicycles in place while allowing quick installation and removal.
- Cam actuated, micro-adjustable clamp allows quick entry and exit and fits 1-inch to 3-inches (25mm–76mm) diameter tubes and seat posts of any shape and material
- Narrow clamping jaws (2.7-inch/7cm) fit into tight areas or on short seat posts
- 360° infinite clamp rotation allows bike to placed in optimal position for specific repairs
- All-steel structure for maximum stiffness and durability
- Super strong glass-filled nylon-composite fittings and top tube internals enable smooth rotation and secure positioning
- Mounts to any flat surface (mounting bolts not included)
Distance from the center of the clamp to the center of the mount is approximately 11 3/4-inch (30cm). Height from bench to center of the clamp axis is approximately 9 7/8-inch (25cm).
Weight Limit: The PCS-12.2 Home Mechanic Bench Mount Repair Stand has an 80 lb. (36kg) weight limit, provided the stand is securely mounted with appropriate fasteners to a solid and secure bench surface. The user is responsible for making sure the workbench and the fasteners are capable of handling this amount of weight.

$673.99
The standard of the bike industry for over 40 years, the PRS-2.3 clamps two bikes and rotates horizontally 360 degrees, allowing one bike to be swung out of the way to work on another. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use.
The PRS-2.3-1 features our 100-3C Adjustable Linkage Clamps, with a time-tested design and straightforward operation.
- Maximum weight capacity: 120 lbs. (54 kg)
- Clamp capacity: 0.875" to 1.625" (22–41 mm) diameter tubes
- Clamp jaws are nominally 4" (100 mm) wide
- Clamp height: adjustable from 50" to 62" (128–158 cm)
- Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector
- Can be installed onto the #135 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)

$409.95
The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike.
Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport.
The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit.
- Maximum weight capacity*: 36 kg (80 lbs.)
- Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide
- Jaw width: 70 mm (2.75")
- Height adjustable from 97 to 147 cm (38" to 58")
- Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6")
- Weight: 5.7 kg (12.6 lbs.)
- The PRS-26 uses the 100-25D Micro-Adjust Clamp
- Replaceable jaw covers (part #1960)
*NOTE: The maximum weight capacity of the PRS-26 assumes the bike's center of gravity is positioned directly below the clamp.

$589.95
- 150lb holding capacity
- Includes work tray (#105) (900119-01)
- Base not included (900706)

$579.95
Built to withstand the rigors of every day shop use, the PRS-3.3 is the stand of choice for professional mechanics around the world. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use.
The PRS-3.3-2 features our 100-3D Micro-Adjust Clamp with narrow clamping jaws and a dual-stage, cam-actuated system that quickly adjusts to accommodate nearly any seat tube or frame size.
- Maximum weight capacity: 120 lbs. (54 kg)
- Clamp capacity: 0.875" to 3" (22–76 mm) diameter tubes, including aero tubes
- Clamp jaws are nominally 2.75" (70 mm) wide
- Clamp height: adjustable from 50" to 62" (128–158 cm)
- Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector
- Can be installed onto the #130 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)
Page 1 of 3
Next page