Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$40.00 - $50.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
$16.00
A good pair of valves can make a big difference in the reliability and ease-of-use for any tubeless setup. Whisky's No. 7 Brass tubeless valves help ensure your tires are dialed for every ride. And, it's always a good call to keep an extra valve in a pocket or bag.
- For use with Whisky tubeless rims and most others
- 40mm length
- Fits up to a 8mm valve hole
- Removable valve core
- Sold as a pair
$19.00 - $25.00
No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes.
- Available in a number of lengths and colors to perfectly fit your rims and your sense of style.
- Includes two valves
$6.95 - $24.99
- Repairs punctures up to 1/4 (6mm)
- Optimized for temps down to 15degF (-9.4degC)
- Synthetic later minimizes the risk of allergic reactions
$14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride.
Available in three sizes for varying tire volumes:
- Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure.
- 75mL: Repairs and inflates low-volume MTB tires in less than a minute.
- 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$14.99
- Double-sided tubular tape for installing tubular tires with no mess or waiting
- Special activated surface of gluing tape makes installation and centering of a tubular tire on a rim very fast and easy
$3.99 - $20.00
Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires.
- Suitable for use in tubeless tires and standard tubes
- Designed to seal punctures up to 1/4"
- Stable down to -30 degrees Fahrenheit
- Non-hazardous, non-corrosive, non-toxic
- Contains natural latex
$34.00
Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires.
- Suitable for use in tubeless tires and standard tubes
- Designed to seal punctures up to 1/4"
- Stable down to -30 degrees Fahrenheit
- Non-hazardous, non-corrosive, non-toxic
- Contains natural latex
$44.00
The Next Level in Sealing Power from the People who Invented Tubeless Conversions
If you've walked the mechanics' pits at any National or International level event, chances are you've seen them: trademark Stan's black quart bottles with no labels. Look closer and you might have seen strange symbols scrawled all over the bottles in a silver marker, letters and numbers, formula notes by the man himself, Stan Koziatek.
For nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit, he developed a proprietary sealant formula with close to twice the amount of the standard sealing crystals plus special "XL" crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance.
The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, the Race Sealant will clog injectors and smaller bottles almost immediately.
Stan's has made Race Sealant available to riders everywhere, and it is only available by the quart.
- First choice of riders around the world for tubeless conversion and flat prevention
- Twice the amount of Stan's standard sealing crystals
- "XL" crystals capable of sealing even larger punctures
- Stays liquid 2-7 months for long-lasting protection
- Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C)
- Natural materials, safe for the environment
$3.25 - $34.00
The Product that Started a Tubeless Revolution
Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant.
Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires.
- First choice of riders around the world for tubeless conversion and flat prevention
- Seals punctures up to 1/4-inch (6.5mm) quickly
- Stays liquid 2-7 months for long-lasting protection
- Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C)
- Natural materials, safe for the environment
- Can be injected through valve stems with removable cores compatible with tubes and tubular tires
$32.99 - $39.99
With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come.
Made from premium lightweight, high strength 7075 aluminium, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.
Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used.
Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.
Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Crushed a rubber or snapped an o-ring? No problem, check out our service kits to spruce up your valves when swapping to your next set of wheels or new bike.
Instructions
(1) Remove valve cap, o-ring and lock nut
(2) Insert valve through valve hole in rim
(3) Push the o-ring onto valve stem
(4) Thread the lock nut onto valve stem
(5) hand tighten lock nut until firm
(6) Screw on valve cap
$14.49
• Integrated presta valve extension
• Machined alloy construction
• Available in 30mm, 50mm, and 70mm
• For use with inner tube with removable Presta valve core
$9.99 - $26.99
Endurance formula lasts twice as long as standard Orange Seal.
- Premium Latex coats the whole casing, from tire bead to tread cap
- Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites
- Developed to add as little weight to a tire as possible
- Made of eco-friendly biodegradable ingredients
$8.99 - $21.99
Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.
$23.99 - $27.99
The VersaValve stem utilizes a large, sturdy base plate that can be fitted on different rims, by use of rubber grommets. The large base plate ensures a solid contact with the rim bed and the adaptable grommets guarantee an airtight fit on most rims for mountain, road or CX use.
- Universal fit. One valve for all rim types
- Replaceable grommets
- Kit includes VersaValve stems, two types of grommet, extra valve cores and RVC tool
$3.99
- Each box contains 20 patch kits
- Each kit contains 6x Glueless Patches (0.98''), 1x Sandpaper
- Travel Size—Can be kept inside a jersey pocket, tool bottle or saddle bag!
$14.99
Laugh in the face of punctures with Muc-Off's super lightweight inner tube sealant! The No Puncture Hassle Inner Tube Sealant is easy-to-install, and the cutting edge molecules seal holes in tubes of up to 4mm, ensuring that your ride is uninterrupted.
- Proprietary water-based non-hazardous formula developed specifically for use with inner tubes
- Compatible with a wide range of tube sizes and bikes - suitable for commuter, folding, urban, touring, MTB and e-bikes
- Works on multiple punctures
- Lasts the life of the inner tube/tire
- Contains cutting-edge molecules to help seal holes quickly and effectively; seals holes in tubes up to 4mm
$9.99 - $139.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable
$1.80 - $49.99
The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.
$31.99
- 6061 Aluminum valve and cap
- Removable valve core
- Comes with round & square rubber bases for different rim types
- Spare alloy valve cap with integrated valve core removal tool
- Installs securely with a 4mm fitting for a hex wrench on the valve and a 10mm wrench flat on the nut
$29.99 - $39.99
- The same tubeless valves, now with a Tire Insert air flow system
- 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts
- Upgraded to aircraft grade 7075 aluminum valve stem and cap
- 4mm machined Allen Key slot for easy installation/removal
- Valve core removal tool integrated into valve cap
- Includes multiple rubber bases to optimize fit with multiple rim types
$11.99
Ultra-compact polypropylene case. Kit includes machined aluminum T-handle with combined reamer and insertion tool and five tire plugs.
- Weight: 48g
$16.99
Eco-Friendly, latex-based formula simultaneously inflates and seals punctured tires within seconds. Works with tubes, tubeless, and tubular tires. Seals standard 1-2mm punctures quickly to get you back in the saddle. Enough pressure to seed a tubeless tire onto a rim; an enduro racers dream come true. For use with both presta and shrader valves. Fills a 29 x 2.4 MTB tire up to about 29psi.
$14.99
- Latex-based formula which can simultaneously inflate and seal most common punctures quickly
- Works with tubes, tubeless, and tubular tires
- Proven to seal up to a 6mm puncture on tubeless tires, getting you back in the saddle faster
- Enough pressure to seat a tubeless tire onto a rim
- Comes with an easy-to-use hose adapter and both Schrader and Presta valve compatible threaded nozzles
- Fills a 29 x 2.4 MTB tire up to about 29psi
$8.99
A new standard in tubeless sealant.
Finish Line Tubeless Tire Sealant, featuring Fiberlink technology, will not cure inside the tires and doesn’t need to be refreshed every few months to maintain effectiveness. This sealant will last the entire usable life of the tire. Since there is no liquid latex or ammonia in Finish Line sealant, it is naturally non-toxic, hypoallergenic and safe for carbon fiber rims. Additionally, Finish Line Tubeless Tire Sealant cleans up easily with water – no more scrubbing or scraping cured latex from tires and rims.
Fiberlink technology makes this possible. Utilizing DuPont Kevlar fibers, Fiberlink seals are extremely robust once they plug a hole. When a puncture happens, fibers rush into the wound and quickly stop air loss. As the tire flexes while it is ridden, the Fiberlink mesh tightens and reinforces itself, creating a confidence-inspiring seal that will last ride-after-ride.
- Non-latex ammonia-free formulation
- Kevlar reinforced Fiberlink mesh seal
- Seals up to 1/4" punctures
- Can be used in extreme temperatures, down to -10 degrees Fahrenheit
$11.99
Dynaplug Megaplugs are constructed from viscoelastic rubber impregnated cord and 6061 aluminum tip.
- Compatible with: Megapill tool, Megaplugger tool, and the Racer tools
- Specially designed to repair large punctures in tubeless bicycle tires
- Approximately three times the thickness of a standard plug (approximately 7/32")
- Pack of 3 replacement plugs
- Made in USA
$15.99
- 2-ply rubber shield fits between tire and tube to prevent flats
- Pair
$15.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel
$14.99
This rim tape is crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Tape is designed for wider Plus and Fat wheels
- Can also be used as a universal tubeless solution for non-Bontrager rims
- Use only with Bontrager TLR rim valve with round base
- Rim tape replacement is recommended if removed from the wheel
- One roll is 5m (197") in length
Page 1 of 4
Next page