The Belleville is Velo Orange's reproduction of what is probably the most popular style of French city and utility bike bar ever. Anyone who enjoys classic European films has seen bars like this dozens of times. The Belleville is 430mm wide (or 450mm outside-to outside) and has zero rise. That's fairly narrow for a city bar, which is an advantage in traffic. Reach is about 180mm; the straight grip section is a generous 150mm. It has a 25.4mm clamp area and is rendered in aluminum alloy. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard inverse shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
Velo Orange's Tourist bar is a "North Road" style bar rendered in polished aluminum alloy. It's similar to the bars used on many classic British roadsters. The clamp area is 25.4mm in diameter. The width is 570mm and the reach is 180mm; it has about 70mm of rise. They sweep back about 60-degrees, and the grip area is about 160mm long. The Tourist accepts regular MTB (22.2mm) grips, brakes, and shifters, but not inverse levers or bar-end shifters.
R12's AO BMX Handlebars are ready for the street, made of burly heat-treated chromoly.
Profile Design's Aerobar Bracket Riser Kit lets you customize the height of your Profile aero bar brackets and extensions for finding a perfect riding position. The kit includes two 10mm risers, two 5mm risers and appropriate-length bolts. Multiple kits can be used if you need more height. Note that this kit is not recommended for Profile Design's Carbon Stryke or T-mag bars.
Profile Design's F-19 Lux Pads fit onto their F-19 armrests (sold separately) and provide additional comfort at a gossamer weight of only 26 grams per pair. Made of Lycra-covered, 21mm-thick EVA foam, these cushioned, supportive pads also sport Velcro straps for easy installation.
$146.99 - $167.99
Super light, comfortable and stable, Profile Design's F-25c Armrest Kit provides excellent adjustability for finding your perfect position. These beautiful carbon armrests have an ergonomic shape and 15 degrees of rotational adjustment to get them fitting just right. You also get supportive and comfortable pads and recessed, rust-resistant hardware (not shown).
Light, comfortable, and stable, Profile Design's F-35 Aluminum Armrest Kit provides excellent adjustability for finding your perfect position. These versatile aluminum armrests have an ergonomic shape, 15 degrees of rotational adjustment and 3 fore/aft positions with a total of 30mm of adjustment. The comfortable Lycra-covered 16mm-thick EVA foam pads simply attach to the armrests with adhesive-backed Velcro so no straps are required. The pads are anti-bacterial, and feature contoured edges for increased long-term comfort.
$129.99 - $154.99
Light, comfortable, and stable, Profile Design's F-35 Carbon Armrest Kit provides excellent adjustability for finding your perfect position. These versatile carbon fiber armrests have an ergonomic shape, 15 degrees of rotational adjustment, and 3 fore/aft positions with a total of 30mm of adjustment. You'll also love the comfortable Lycra-covered 16mm-thick EVA foam pads that simply attach to the armrests with adhesive-backed Velcro so no straps are required. The pads also have contoured edges for additional comfort and they're even antibacterial.
Profile Design's Lux Pads keep both performance and comfort high, exactly where they need to be when you're pushing your boundaries. These velcro backed pads fit Profile Designs F-35 armrests (sold separately), and feature EVA foam, an anti-microbial cover, and a contoured edge for improved long-term comfort. They're even available in three thicknesses so you can dial in your fit to perfection.
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
The 10-4 Bar is the biggest bar Odyssey makes. It uses large radius bends, thicker walled, butted tubing, and a traditional 7/8-inch crossbar for superior strength and durability. These bars have a post-weld heat-treating which is guaranteed against manufacturer’s defects. Features: - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated Specs: - 10-inch rise - 30-inch width - 11-deg backsweep - 4-deg upsweep
Odyssey's 49er is a traditional-looking 4-piece bar that uses multi-butted main tubing, traditional 7/8" crossbar for strength, larger radius bends for greater durability, and welded end caps to reduce flex. These bars have a post-weld heat-treating which is guaranteed against manufacturer’s defects. SPECS - 9-inch Rise - 29-inch Width - 1.5° Upsweep - 12° Backsweep - 2lbs 3.4 oz
- Offers brake positioning of a flat bar with the multiple hand positions of a drop bar - Great for commuting, tandems, endurance racing, dirt drop riding - When switching from drops to moustache, go 20-40mm shorter stem extension - Rigid aluminum construction - 51.5cm width - 50mm drop - 95mm reach - 26mm clamp
Electra's Amsterdam Handlebars are a great set of chrome-plated cruiser-style bars with the rise and width for comfortable upright riding and a commanding view ahead.
Enjoy the classic style of Electra's Townie Original/Balloon Aluminum Handlebar when it's mounted to your favorite cruiser. It's got enough rise to keep you in an upright riding position, and just enough backsweep to keep your hands comfortably positioned for stability and control.
Traditional trekking bar with butterfly bend provides many options for hand positions, making this bar a comfortable choice for touring and recreational cyclists alike. - Designed for City-Trekking use - Not intended for mountain biking - Bar Clamp Diameter (mm): 25.4 - Color: Black - Lever Compatibility: Mountain 22.2 - Weight: 479g - Width: 585mm
Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style. - Material: Aluminum - Lever Compatability: Mountain 22.2mm
Deluxe Welcome USA BMX Handlebars. Proudly made in the USA. Ready to take a good ol' American beating, then stick the next landing. - Weight: 912g - Width: 29-inches - Material: Steel - Upsweep: 1° - Backsweep: 12°
Position versatility makes Zipp’s Service Course 80 bars an instant favorite. The drops are kept close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff for uncompromising strength, these aluminum bars are ready for anything.
Bontrager's Satellite Plus IsoZone Handlebar w/Satellite inForm Grips is a great set of handlebars and grips in one package. This system offers excellent comfort by providing suspension for your hands with Bontrager's built-in IsoZone elastomer inserts in the ends of the bars, that disperse pressure, neutralize vibrations and absorb impacts. Meanwhile the inForm grips have an ergonomic shape for excellent support and to eliminate pressure. Together, this system improves comfort by nearly 30%, for a difference you'll love mile after mile.
$18.99 - $28.99
Lightweight aluminum construction with a versatile riser bar design.
Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
$140.00 - $150.00
Whisky Parts Co. carbon handlebars are tested to the highest standards to give you a high level of performance mile after mile. So keep the weight low and stay comfortable and in control while you shred with the Whisky Parts Co. No.9 Carbon Flat Handlebar. - Material: Matte UD Carbon - Rise: 0mm - Width: 840mm - Weight: 215 grams
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the Carbon Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Carbon fiber - Width: 750mm - Backsweep: 7 degrees - Bar Clamp Diameter: 31.8mm - Rise: 20mm - Upsweep: 5 degrees - Colors: Black
The Truvativ CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style - and to enhance each rider's cockpit interface. - Kyle Strait signature Eagle graphics - 808 millimeters wide for strength and leverage - Upsweep: 5 - Material: Aluminum
Combine a proven shape, proven width, proven materials you’ve got the Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. - Stiff, precise and wide - Weight: 240g - Material: Carbon
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black
Page 1 of 8 Next page