Hardtail

KEY FEATURES: - Scale Carbon HMF Frame - RockShox Judy 100mm Fork - RideLoc 2 Remote - SRAM NX-SX Eagle 12 Speed - Shimano Disc Brakes - Schwalbe Smart Sam Tires Balancing the ALL-NEW Scale's DNA, we've created a whole new breed in the world of hardtail mountain bikes. A racing inspired geometry, coupled with a straightforward and sharp design provides the all-new Scale 900 line with its distinctive character and aggressive look—a bike that proudly flaunts its definitive characteristics. This rig is ready for just about anything, are you? TECHNOLOGIES: ADJUSTABLE HEAD ANGLE With the new Scale RC, you can adjust the head angle by 0.6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. DESIGN The new Scale’s design was uncompromisingly subjected to our pursuit of perfection and drive for pure efficiency, strictly following the guiding principle of "Form follows Function". In our search for the ultimate, yet most simple construction, we’ve centered the design around the essentials by balancing the bike’s DNA in order to create a whole new breed of XC bike. The result is a straightforward and clear design, which provides the all-new Scale with its distinctive character and aggressive look: a bike that proudly shows off its characteristics. HOLLOW DROPOUT CONSTRUCTION The dropout features an advanced, hollow construction, which allows the axle head to clamp against the inner surface of the dropout and leaves the head flush with the surface. This enables the lightest possible construction approach and a clean-looking design from the outside. While being able to directly shave off 7.5g with the new dropout construction, the optimized design favors a narrower construction of the rear triangle area, which in turn enables a reduction of 20g in this area of the frame (HMX-SL). MONOCOQUE CONSTRUCTION The new Scale RC’s monocoque construction enables production using only one mold for the main section of the bike, the front triangle. Applying our carbon expertise, the new Scale, therefore, consists of only 3 separate pieces molded together. This directly translates into an increased level of efficiency due to the reduced number of junctions required therefore decreasing weight while keeping superior stiffness – something we’re always aiming for with hardtail race bikes. With the full frame constructed as a system, the monocoque design enables the frame to handle forces as a whole. SERVICE DOOR A little service door, which is accessible through a downtube cover, allows easy access to the interior of the frame without the need to remove the Bottom Bracket. Frame maintenance is made easy with regards to cable routing.

Roscoe 8 is a trail hardtail for anyone looking to have some serious fun out in the dirt. 29er wheels, grippy 2.6" tires, and a 140mm suspension fork make it a blast on every trail, from packed singletrack to the loose stuff. It's a laid-back trail mountain bike dressed in a high-quality spec that's ready to party. It's right for you if... You want to have fun. You're searching for a playful trail bike with high-quality parts so that when you're out on the trail, the only thing you have to worry about is your face hurting from smiling too much. The tech you get A lightweight aluminum frame, a 140mm RockShox 35 Gold fork with a lockout, a SRAM NX Eagle 1x12 drivetrain with a wide range of gears for climbing, powerful 4-piston brakes, and a dropper post for room to get low on descents, corners, and jumps. Plus, fast-rolling 29er wheels with a 108-tooth Rapid Drive hub for instant engagement and wide, grippy 2.6" tires. The final word High-quality parts, high quality fun. With an upgraded fork, upgraded wheels, a wide range of gears, and 4-piston brakes this bike takes trail-riding shenanigans seriously. - 29er wheels and wide, 2.6" tires make for a grippy, confident, and fast-rolling ride - The dropper post lets you lower your saddle on the fly, so it's out of the way on descents - The RockShox fork's Solo Air spring can easily be adjusted for a specific rider weight, and it's lighter than a coil spring - The fork’s lockout feature lets you temporarily lock the suspension for better efficiency on flat stretches Wheel size: - Sizes X-Small – Small: 27.5-inch - Sizes Medium – X-Large: 29-inch

The Chameleon is a blank canvas, ready to go in whatever direction your imagination takes it. Creativity in wheel size, gearing and component choice make it the perfect muse for freethinkers and freedom seekers alike. We made the Chameleon for riders who like to sculpt their ideal bike, and aren't afraid to experiment. Whether 29er or mixed, geared or fixed, multiple major configuration transformations are made easy via the interchangeable dropouts. The low slung top tube and progressive geometry means this bike blends into whatever surroundings you place it. From raucous short-cuts across town to skipping the city altogether. It turns itself to trail exploration with the flip of an Allen key, thanks to the triple-bolt cargo cage mount under the downtube and standard bottle mount within the frame. Whatever the weather, however long the ride, wherever you're going, the Chameleon is so endlessly customizable and adjustable that the only constraint is really your own mind and motivation.

The Chameleon is a blank canvas, ready to go in whatever direction your imagination takes it. Creativity in wheel size, gearing and component choice make it the perfect muse for freethinkers and freedom seekers alike. We made the Chameleon for riders who like to sculpt their ideal bike, and aren't afraid to experiment. Whether 29er or mixed, geared or fixed, multiple major configuration transformations are made easy via the interchangeable dropouts. The low slung top tube and progressive geometry means this bike blends into whatever surroundings you place it. From raucous short-cuts across town to skipping the city altogether. It turns itself to trail exploration with the flip of an Allen key, thanks to the triple-bolt cargo cage mount under the downtube and standard bottle mount within the frame. Whatever the weather, however long the ride, wherever you're going, the Chameleon is so endlessly customizable and adjustable that the only constraint is really your own mind and motivation.

The Chameleon is a blank canvas, ready to go in whatever direction your imagination takes it. Creativity in wheel size, gearing and component choice make it the perfect muse for freethinkers and freedom seekers alike. We made the Chameleon for riders who like to sculpt their ideal bike, and aren't afraid to experiment. Whether 29er or mixed, geared or fixed, multiple major configuration transformations are made easy via the interchangeable dropouts. The low slung top tube and progressive geometry means this bike blends into whatever surroundings you place it. From raucous short-cuts across town to skipping the city altogether. It turns itself to trail exploration with the flip of an Allen key, thanks to the triple-bolt cargo cage mount under the downtube and standard bottle mount within the frame. Whatever the weather, however long the ride, wherever you're going, the Chameleon is so endlessly customizable and adjustable that the only constraint is really your own mind and motivation.

Procaliber 9.5 is a lightweight carbon hardtail with the unique advantage of our trail-smoothing IsoSpeed decoupler. It's the most affordable carbon model in the Procaliber mountain bike family, and it's built for speed and efficiency on singletrack with a wide-range Shimano Deore 1x12 drivetrain, RockShox Judy SL fork, and speedy 29er wheels. It's right for you if... You love riding singletrack. You’ve entered several XC races, enjoyed every single one, and want to give racing a serious go. You’re looking for a solid carbon race bike at an affordable price. The tech you get A light and stiff carbon frame with trail-smoothing IsoSpeed, a 100mm RockShox Judy SL fork with Solo Air spring, and a TurnKey lockout, a smooth-shifting Shimano Deore 1x12 drivetrain, powerful Shimano hydraulic disc brakes, and fast, tubeless-ready 29" wheels. The final word Procaliber 9.5 gives you the advantages of a carbon race bike with IsoSpeed at a wallet-friendly price, and it gives you solid tech where it matters most. Why you'll love it - You're getting into a carbon race bike at an awesome price - The IsoSpeed decoupler and carbon frame makes it ride smoother than any other hardtail, so your body doesn't get beat up by trail chatter - You get a Straight Shot downtube for extra-stiff, responsive handling without added weight, and a Knock Block headset that protects against spinning bars and fork crowns - The RockShox fork's Solo Air spring can easily be adjusted for a specific rider weight, and it's lighter than a coil spring

With raucous off-road ability and a Sherpa-like carrying capacity, it’s ready for expeditions in the high mountains. The Cale AL is the aluminum alternative to its steely Cale partner, ready to conquer the mountains as sold. Not scrimping on off-road potential nor cargo-carrying capability, this bike can handle your local trail center or the high peaks in its stride with ease. Fast-rolling 29" wheels plus the chance of using oversized 27.5"+ tires give you the option to experiment with home-based modifications. As if these features were not already enough to hit the trails, the bike comes with a dropper post and suspension fork, avec plaisir.

Roscoe 9 is our best trail hardtail, built for lap after lap of dirt-filled fun. A 140mm FOX Rhythm 36 fork, powerful 4-piston brakes, and a fast-and-grippy wheel and tire combo deliver awesome capability whether you're nailing jumps or picking through gnarly rock gardens. It's right for you if... You love the serious fun and connected feel a hardtail brings to the trail, and you want one that’s spec’d with top-notch parts that love rough and tumble runs as much as you do. The tech you get A lightweight aluminum frame, a 140mm FOX Rhythm fork with beefy 36mm stanchions, a Shimano SLX/XT 1x12 drivetrain with a wide range of gears for climbing, powerful 4-piston brakes, and a dropper post for room to get low on descents, corners, and jumps. Plus, fast-rolling 29er wheels and wide, grippy 2.6" tires. The final word Rip laps, catch air, and crush techy descents on our best hardtail. Of all the rad parts on this bike, the FOX Rhythm 36 fork is the best upgrade—it’s capable of soaking up even the roughest lines. - 29er wheels and wide 2.6" tires make for a grippy, confident, and fast-rolling ride - Bigger, stiffer 36mm fork stanchions won't flex, so you can push harder with more precise, confident steering that helps you stay on your line - The FOX fork's air spring can easily be adjusted for a specific rider weight, and it's lighter than a coil spring - The dropper post lets you lower your saddle on the fly, so it's out of the way on descents

The Chameleon is a blank canvas, ready to go in whatever direction your imagination takes it. Creativity in wheel size, gearing and component choice make it the perfect muse for freethinkers and freedom seekers alike. We made the Chameleon for riders who like to sculpt their ideal bike, and aren’t afraid to experiment. Whether 29er or mixed, geared or fixed, multiple major configuration transformations are made easy via the interchangeable dropouts. The low slung top tube and progressive geometry means this bike blends into whatever surroundings you place it. From raucous short-cuts across town to skipping the city altogether. It turns itself to trail exploration with the flip of an Allen key, thanks to the triple-bolt cargo cage mount under the downtube and standard bottle mount within the frame. Whatever the weather, however long the ride, wherever you’re going, the Chameleon is so endlessly customizable and adjustable that the only constraint is really your own mind and motivation.

Farley 7 is a burly fat bike built for roaming trails no matter the season. From dusty summer doubletrack to ice-packed singletrack, the huge 4.5-inch tires give you sure-footed stability and tons of traction. A suspension fork takes the sting out of rowdy roots and rocks while the new, slacker head tube angle gives you more confidence when the trail turns steep. Mounts all over the frame make it easy to equip it with all of your essentials for adventure. - All the mounts make it easy to add accessories and customize Farley for how you want to roam. - The suspension fork eats up rocks and roots for a smooth ride, and it also slackens the head tube angle for added confidence and stability. - You'll stay afloat on snow, sand, mud, and dirt thanks to its huge 4.5-inch tires. - The new progressive trail geometry feels more capable and confident than ever. - The internally routed dropper post lets you move around on the bike and get behind the saddle on steep descents.

Procaliber 9.6 is a race-ready cross-country hardtail. Its fast carbon frame boasts a trail-taming IsoSpeed decoupler, quick-rolling 29er wheels, and a RockShox Recon Gold RL suspension fork to keep you fast and smooth over roots and rocks during your most demanding mountain bike rides.  WHY YOU'LL LOVE IT - The upgraded fork gives you a remote lockout, a more plush spring, and a damper that gives you more control over the rough stuff - The IsoSpeed decoupler and carbon frame makes it ride smoother than any other hardtail, so your body doesn't get beat up by trail chatter - The solid XC groupset will hold its own on the race course, but it's also going to hang tough through everyday training rides - You get a Straight Shot downtube for extra-stiff, responsive handling without added weight, and a Knock Block headset that protects against spinning bars and fork crowns IT'S RIGHT FOR YOU IF… You're more than a casual singletrack rider. You put in long miles on the trail, show up to race, and want the speed, efficiency, and light weight of a carbon cross-country bike with IsoSpeed. THE TECH YOU GET A light and stiff carbon frame with the unique advantage of our trail-smoothing IsoSpeed, a 110mm RockShox Recon Gold RL fork with a plush DebonAir spring and remote lockout, a lighter-weight wide-range 12-speed Shimano SLX drivetrain, and Tubeless Ready 29" Bontrager Kovee Comp 25 wheels. THE FINAL WORD This bike can compete with the very best hardtails out there. You get fatigue-fighting IsoSpeed with component upgrades that save weight and give you better handling. If you want to rock the local race scene and rack up serious mileage, Procaliber 9.6 is a great choice.

The Highball is our flagship carbon hardtail race thoroughbred, and a dark horse in XC versatility. More capable than a pure endurance bike, more composed than most XC race-rigs, the Highball has evolved to be easier to ride harder for longer. We fine-tuned the carbon layup process and the low-angle, bridgeless seatstays join the seat tube below the top tube junction in order to curb trail chatter. Built around a 27.2mm diameter seat post, the whole package combines to take the "hard" out of hardtail riding. It has the mindset of a race bike but it's prepared for more. With capacity for three bottle cages, the ever-reliable threaded BB and, of course, the lifetime warranty that comes standard with all Santa Cruz bikes, it's the kind of bike that'll go far.

Cannondale's best XC hardtail just got better. If going really, really fast on dirt in lycra is your cup o' tea, nothing lets you top 'em on the climbs and drop 'em on the descents like the F-Si. The World Cup edition features Cannondale's Hi-MOD BallisTec Carbon frame with stiffness-enhancing Si offset. The Lefty Ocho fork features no-bind needle bearings and extreme stiffness for pinpoint steering, now with a single crown design. ENVE's M525 carbon rims keep this rig at fighting weight, while the Schwalbe Racing Ray tires fly over hardpack and dig into sketchy corners. SRAM's XX1 drivetrain serves up 12 wide-ranging speeds, a carbon crankset, and crisp, precise shifting to give you the advantage on every part of the course. And, SRAM Level Ultimate brakes provide reliable, highly tunable braking power when you need it, so you can carry more speed and brake at the last possible second. Cannondale's carbon bar and seatpost keep you in control while adding almost no weight, ensuring that your race rig is sleek, lean, and ready to win.

KEY FEATURES: - Scale Carbon HMX Frame - RockShox SID SL Ultimate RD3 100mm - RideLoc 2 / 3-Position Remote - SRAM XX1 Eagle AXS, PWR Meter - Shimano XTR Disc Brakes - Maxxis Rekon Race Foldable Tires The ALL-NEW Scale RC World Cup EVO is the perfect blend of stiffness, light weight, and 30 years of carbon expertise. These characteristics, encompassed in an uncompromising frame design decisively accelerate the Scale away from the pack with every pedal stroke. Whenever you find yourself up against the clock, tip the scales in your favor. TECHNOLOGIES: ADJUSTABLE HEAD ANGLE With the new Scale RC, you can adjust the head angle by 0.6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. SYNCROS FRASER IC COMBO The New Scale features the Fraser iC combo from Syncros. Integrating the cables presents a number of unique problems and the Fraser was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. DESIGN The new Scale’s design was uncompromisingly subjected to our pursuit of perfection and drive for pure efficiency, strictly following the guiding principle of "Form follows Function". In our search for the ultimate, yet most simple construction, we’ve centered the design around the essentials by balancing the bike’s DNA in order to create a whole new breed of XC bike. The result is a straightforward and clear design, which provides the all-new Scale with its distinctive character and aggressive look: a bike that proudly shows off its characteristics. HOLLOW DROPOUT CONSTRUCTION The dropout features an advanced, hollow construction, which allows the axle head to clamp against the inner surface of the dropout and leaves the head flush with the surface. This enables the lightest possible construction approach and a clean-looking design from the outside. While being able to directly shave off 7.5g with the new dropout construction, the optimized design favors a narrower construction of the rear triangle area, which in turn enables a reduction of 20g in this area of the frame (HMX-SL). MONOCOQUE CONSTRUCTION The new Scale RC’s monocoque construction enables production using only one mold for the main section of the bike, the front triangle. Applying our carbon expertise, the new Scale, therefore, consists of only 3 separate pieces molded together. This directly translates into an increased level of efficiency due to the reduced number of junctions required therefore decreasing weight while keeping superior stiffness – something we’re always aiming for with hardtail race bikes. With the full frame constructed as a system, the monocoque design enables the frame to handle forces as a whole. SERVICE DOOR A little service door, which is accessible through a downtube cover, allows easy access to the interior of the frame without the need to remove the Bottom Bracket. Frame maintenance is made easy with regards to cable routing.

The Purest Form of Racing. A whole new breed of XC Hardtail, purpose built to hurt 'em on the ups, drop 'em on the downs, and propel you straight to the top step. Where it thrives Between the tape What it's built for Speed, Efficiency, and Endurance Highlights: - Progressive, ultralight Hi-MOD Carbon frame / Lefty Ocho Carbon 110mm fork / Integrated Cannondale App connectivity - SRAM XX1 Eagle AXS wireless 12-speed group / Level Ultimate disc brakes - HollowGram 25 carbon tubeless-ready wheels / Cannondale C1 Carbon bar and post Technology: Confidence on edge - No hesitant, fistful-of-brakes descending here. The ultra slack, 66.5° front end gives you the stability and control you need to really open it up on the downhills. Brake later. Corner harder. Pass on the descents. Stay centered - Scalpel HT's Proportional Response size-specific chainstays and steep seat angle keep you balanced between the wheels for better traction and power on the ups, and more confident control on the downs. Lead with Lefty - 110mm of the smoothest, most precise-handling ultralight front suspension out there. Extra-long fork offset brings extra agility to the super stable front end. Better control, more speed. Drop the chatter - Sculpted flex zones in the chainstays partner with dropped seatstays to eat up the chatter from rowdy terrain, boosting control, smoothing the ride, and minimizing fatigue. Go harder. Go faster. Go farther.

KEY FEATURES: - Scale Carbon HMX SL Frame - FOX 32SC Float Factory 100mm Fork - RideLoc 2 / 3-Position Remote - SRAM XX1 Eagle AXS, PWR Meter - Trickstuff Piccola Disc Brakes - Maxxis Rekon Race Foldable Tires The ALL-NEW Scale RC SL is the perfect blend of stiffness, lightweight, and 30 years of carbon expertise. These characteristics, encompassed in an uncompromising frame design decisively accelerate the Scale away from the pack with every pedal stroke. Whenever you find yourself up against the clock, tip the scales in your favor. TECHNOLOGIES: ADJUSTABLE HEAD ANGLE With the new Scale RC, you can adjust the head angle by 0.6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. SYNCROS FRASER IC COMBO The New Scale features the Fraser iC combo from Syncros. Integrating the cables presents a number of unique problems and the Fraser was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. DESIGN The new Scale’s design was uncompromisingly subjected to our pursuit of perfection and drive for pure efficiency, strictly following the guiding principle of "Form follows Function". In our search for the ultimate, yet most simple construction, we’ve centered the design around the essentials by balancing the bike’s DNA in order to create a whole new breed of XC bike. The result is a straightforward and clear design, which provides the all-new Scale with its distinctive character and aggressive look: a bike that proudly shows off its characteristics. HOLLOW DROPOUT CONSTRUCTION The dropout features an advanced, hollow construction, which allows the axle head to clamp against the inner surface of the dropout and leaves the head flush with the surface. This enables the lightest possible construction approach and a clean-looking design from the outside. While being able to directly shave off 7.5g with the new dropout construction, the optimized design favors a narrower construction of the rear triangle area, which in turn enables a reduction of 20g in this area of the frame (HMX-SL). POLYMER INSERTS With the all-new Scale RC, we constantly reduced the amount of metal inserts wherever possible. Instead, lighter polymer versions were incorporated and can be found as the bottle cage inserts on the HMX-SL frames. These can be plugged completely, sitting flush on the frame due to a smart and flexible clipping mechanism. Being able to set up the plugs and mounts needed provides riders with maximum flexibility and further eliminates potential vulnerable points as these are easily replaceable in the event of a damaged thread. Plugs and inserts are easy to set up without the need for additional tools and further contribute to the overall clean design. MONOCOQUE CONSTRUCTION The new Scale RC’s monocoque construction enables production using only one mold for the main section of the bike, the front triangle. Applying our carbon expertise, the new Scale, therefore, consists of only 3 separate pieces molded together. This directly translates into an increased level of efficiency due to the reduced number of junctions required therefore decreasing weight while keeping superior stiffness – something we’re always aiming for with hardtail race bikes. With the full frame constructed as a system, the monocoque design enables the frame to handle forces as a whole. SERVICE DOOR A little service door, which is accessible through a downtube cover, allows easy access to the interior of the frame without the need to remove the Bottom Bracket. Frame maintenance is made easy with regards to cable routing.