Filter By:
Cables
$176.00
- Hydraulic Disc Brake Hose Fitting Kit
- Includes 50 threaded hosebarbs, 50 red comp fittings, 1 T8 Torx
- Compatible with Stealthamajig and standard levers
$130.00
- Brake housing for polymer coated brake cables
- Refer to Documents and links to find the right product
$3.50 - $99.90
- Brake casing has internal lining and external plastic coating
- Derailleur casing is compressionless with internal lining and external plastic coating
$70.00
EPS cable guide magnets are required for internally routing EPS wires.
- Includes: wire, metal cable, and magnet
$52.00
SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes.
- Beveled Banjo Hydraulic Brake Hose Kit fits SRAM road bike brakes that feature a beveled banjo fitting at the lever
- 2000mm black hose
- Includes hose, 2 threaded barbs, 2 olives, 4 compression nuts, extra banjos, hose clips, and T8 Torx L-Key
- Compatible with Flat Mount, RED 22, Force 22, Rival 22, Force 1, Force CX1, Apex1 HRD, S700
$49.00
SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes.
- Black Banjo Hydraulic Brake Hose Kit fits both SRAM road and mountain bike brakes that feature a black banjo fitting at the caliper
- 2000mm black hose
- Includes hose, 2 threaded barbs, 2 olives, 4 compression nuts, hose clips, and T8 Torx L-Key
- Compatible with Level ULT, Level TLM (A1), Code R/RSC (B1), RED eTap HRD, S900 Monoblock
$49.00
SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes.
- Threaded Crimp Hydraulic Brake Hose Kit fits SRAM mountain bike brakes that feature a threaded crimp fitting at the caliper
- 2000mm black hose
- Includes hose, 2 threaded barbs, 2 olives, 2 compression nuts, hose clips, and T8 Torx L-Key
- Compatible with Elixir 5, Elixir 7, Elixir 9, Elixir R, Elixir CR, Elixir, X0, Elixir CR Mag, Guide RSC (A1), Guide RS (A1), Guide R (A1), DB5, Level TL
$49.00
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.
- Compatible with SRAM Guide R, RS, RSC, and DB5 brakes
- Length: 2000mm
$48.99
Original equipment hydraulic hoses for no-compromise brake performance.
- 2000mm, black
$46.99
K2 Hydraulic Hose Kit for Dominion Prime Stroker and El Camino
Hayes proprietary hose kit is reinforced with Kevlar for strength and durability. Kit includes: 200cm rear hose and all fittings.
$42.00 - $44.10
Hose kits for Hayes hydraulic disc brakes include stiff, durable hose and the necessary fittings.
$41.99 - $42.00
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation.
- Dura-Ace grade SLR-EV Road brake cable set
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance
- Pre-lubed with special polymer compatible grease
$40.00
SRAM's SlickWire MTB Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent stainless-steel cables, slippery lined 5mm-diameter housings, aluminum ferrules, and frame protectors.
$38.00
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation.
Includes:
- 1400mm x 5mm housing x 1
- 800mm x 5mm housing x 1
- 2050mm x 1.6mm cable x 1
- 1000mm x 1.6mm cable x 1
$33.99
- Disc brake hose for all hydraulic Shimano disc brakes with straight connection type. Length 2000mm, outer diameter approx. 5mm.
- Compatible brake levers: BL-T615, ST-M4050, BL-M506, BL-M505, BL-M445, BL-M396, BL-M395, BL-M355
- Compatible brake caliper: BR-T615, BR-M4050, BR-M447, BR-M446, BR-M395, BR-M355
- Also compatible ST-RS785 and ST-RS685 road hydraulic levers with BR-RS785 or BR-RS805 calipers
- Straight connection at lever and caliper
$29.99
Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise.
- 10mm outside diameter
- Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose
$29.99
- Pre-lubed with special polymer compatible grease
- Polymer-coated inner cable reduces the sliding resistance to achieve lighter and quicker operation
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur like material from polymer coating will not affect the performance
- Ultegra grade SLR-EV Road brake cable set
$29.90
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut
$27.99
Shimano EW-SD300 Di2 eTube Wire for external routing is available in a variety of lengths.
- Compact design makes new electric components smaller and lighter
- EP8 EP800 Series
$27.00
Shimano Stainless Road/MTB Brake Cable & Housing Sets
- 1 x 2000mm black 5mm housing
- 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables
- 2 end caps and 2 cable crimps
$27.00
- 1.2 mm x 2100 mm (1 pc.)
- 1.2 mm x 1800 mm (1 pc.)
- OPTISLICK
- Stainless steel
- Outer cap with short tongue for ST (2 pcs.)
- SIS-SP40 outer caps (3 pcs.)
- SIS-SP40 sealed outer caps (1 pc.)
- Inner end caps (2 pcs.)
- OT-SP41 1700 mm
- OT-RS900 (1 pc.)
$25.00
Precision-machined 5mm ID brass cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables.
- Inside diameter: 5mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: brass
- Bottle of 50pcs
$22.00
- Complete ferrule and cable end kit
- Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4)
- Material: Aluminum
$19.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$15.00
- For either front or rear shifter
- Road & MTB compatible
- 1.1 polished stainless steel cable
$15.00
Cables are coated with a durable low-friction polymer.
- Dupont Tefzel coating is more durable than previous coated cables
- Length: 2350mm
- Diameter: 1.6mm
- Double Ended: No
$14.99
Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable.
- Length: 60 – 65mm
- Black
$14.77
Hose fittings for Hayes hydraulic disc brakes available a la carte.
Hayes brake compatibility:
- HFX-9
- Prime
- Sole
- El Camino
- Radar
Page 1 of 2
Next page