Saddles

A light and lean performance saddle developed directly with Lidl-Trek athletes for comfort through the toughest races. - Race Shop Limited design was developed for the needs of Lidl-Trek athletes - OCLV Carbon shell provides a perfect balance of weight, strength, and compliance - Short profile provides targeted support for riders of any gender in a performance riding position - Full saddle cutout minimizes soft tissue pressure for lasting comfort and performance - Minimally bonded padding shaves weight and creates a sleek, high-end aesthetic - Oversized carbon rails for lightweight strength (specific seat post rail clamps required)

For use in the gym or on the road, a Terry gel saddle cover can be a lifesaver when dealing with bad exercise bikes and uncomfortable bike saddles. - Synthetic nylon/Lycra cover - Gel insert made of a semi-fluid polymer that supports and distributes pressure - Contoured shape with center depression strategically located for pressure relief against soft tissue area - Secures with a tie tether over standard bike seats up to 7 inches in width and 10 inches in length - Length x width: 264mm x 160mm - Weight: 196 grams; 6.9 ounces

Terry's Cite X saddle was designed for recreational riders who spend a half-day on the bike or less, ride nearly upright with lots of weight against the saddle, prefer the closest thing to a pillow, or have significant lower back pain. A completely seamless, heavily contoured top with a large cutaway will hit and miss in all the right places. Shock-absorbing elastomers molded into the saddle base create the effect of springs without any mechanical devices. They also help eliminate vibrations from the road or surface that ordinarily get transferred straight to the spine. A durable synthetic top with rear graphics is easy to maintain and will look new for years. - Seamless synthetic cover with screen-printed graphics - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Length x width: 249mm x 175mm - Weight: 425 grams; 15 ounces - Rails: Satin steel

A layer of gel across the top gives an additional level of relief to the Cite X Gel. It was designed for recreational riders who spend a half-day on the bike or less, ride nearly upright with lots of weight against the saddle, prefer the closest thing to a pillow or have significant lower back pain. A completely seamless, heavily contoured top with a large cutaway will hit and miss in all the right places. Shock-absorbing elastomers molded into the saddle base create the effect of springs without any mechanical devices. They also help eliminate vibrations from the road or surface that ordinarily get transferred straight to the spine. A durable synthetic top with rear graphics is easy to maintain and will look new for years. - Seamless synthetic cover with screen-printed graphics - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Thin gel layer along the top of the saddle provides an additional level of comfort - Length x width: 249mm x 175mm - Weight: 454 grams; 16.0 ounces - Rails: satin steel

A layer of gel across the top gives an additional level of relief to the Cite X Gel. It was designed for recreational riders who spend a half-day on the bike or less, ride nearly upright with lots of weight against the saddle, prefer the closest thing to a pillow, or have significant lower back pain. A completely seamless, heavily contoured top with a large cutaway will hit and miss in all the right places. Shock-absorbing elastomers molded into the saddle base create the effect of springs without any mechanical devices. They also help eliminate vibrations from the road or surfaces that ordinarily get transferred straight to the spine. A durable synthetic top with rear graphics is easy to maintain and will look new for years. - Seamless, synthetic top - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Thin gel layer for added comfort - Length x width: 274mm x 173mm - Weight: 479 grams; 16.9 ounces - Rails: steel

With over 100,000 currently on the road, the Liberator X for women has earned its reputation as one of the most comfortable saddles for nearly any kind of rider. We recommend it to people who are in a slightly more upright riding position on their bike, have a high degree of saddle sensitivity, ride great distances, tour by bike, and are likely to ride daily. The ergonomically-shaped back panel of the Liberator X reduces the points of stitching contact between you and your saddle. A wider, contoured rear, large cutaway with extended depression off the back, and more padding throughout make the Liberators excellent options for touring (also available in gel and elite versions). - Black Dura-tek cover with gray stitching - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Length x width: 249mm x 163mm - Weight: 377 grams; 13.3 ounces - Rails: Satin steel

With over 100,000 currently on the road, the Liberator X for women has earned its reputation as one of the most comfortable saddles for nearly any kind of rider. We recommend it to people who are in a slightly more upright riding position on their bike, have a high degree of saddle sensitivity, ride great distances, tour by bike, and are likely to ride daily. One notch higher on the comfort scale, Terry's Liberator X Gel for women is as soft a touring saddle as you should buy if you're a pretty serious rider. Lots of people make the mistake of thinking that a really soft, squishy saddle is the solution to their seat woes, but after an hour they begin squirming because the pressure is spread evenly across all areas. We've engineered this saddle to give you all the softness you need, with good support below. The ergonomically-shaped back panel of the Liberator reduces the points of stitching contact between you and your saddle. A wider, contoured rear and large cutaway with extended depression off the back also add to the structural comfort. - Perforated black Dura-tek cover with gray stitching - Thin gel layer along the top of the saddle provides an additional level of comfort - Length x width: 249mm x 163mm - Weight: 411 grams; 14.5 ounces - Rails: Satin steel

For over two decades, Terry has worked with all levels of riders and addressed all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. One of the best values you can buy in an Italian-made saddle, the Butterfly Cromoly is also one of the most popular saddles in the Terry line. Wider in the rear than typical race saddles for good support of a woman's sit bones; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with multi-density injection molded foam that's a bit stiffer in the rear for more power while pedaling; cromoly steel rails that allow us to save a few euro and make this variation a great deal. - Length x width: 262mm x 155mm - Weight: 326g / 11.5oz - Rails: FeC alloy - Cover/features: smooth Dura-tek with printed accents - Made in Italy

Terry's best selling saddle for men, in its best-value Fly Chromoly package. Ridden and universally loved around the world, the original Terry Fly is the kind of saddle you just don’t think about. You'll see them on every kind of bike, ridden by everyone from pro riders to Silicon Valley entrepreneurs. RAAM riders and Randonneurs swear by them. Magazine editors have all hailed them as the most comfortable saddles for men. And if you’re reading this, chances are you’re no stranger to the Fly, either. This synthetic-covered, vegan-friendly version is flat across the top with multi-density injection-molded foam that’s a bit stiffer in the rear for more power while pedaling; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; seamless across the entire top to reduce the potential for chafing; equipped with chromoly steel rails that make this saddle a great value. - Smooth Dura-tek with screen-printed accent - Completely seamless across saddle top to reduce the potential for chafing - Center cutaway with rear relief channel to reduce contact points - Length x width: 277mm x 140mm - Weight: 316 grams; 11.1 ounces - Rails: FeC alloy

Another great value in the Terry line, the Butterfly Cromoly Gel takes comfort up a level with the addition of a thin gel layer along the top of the saddle. For two decades, Terry has been designing and testing saddles with female athletes, distance riders, and recreational cyclists. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. A wonderful saddle for endurance/distance riders, the Butterfly Cromoly Gel is wider in the rear than typical race saddles for good support of a woman's sit bones; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with multi-density injection molded foam that's a bit stiffer in the rear for more power while pedaling; cromoly steel rails. - Smooth Dura-tek cover with printed accent - Thin gel layer along the top of the saddle provides an additional level of comfort - Length x width: 262mm x 155mm - Weight: 345 grams; 12.2 ounces - Rails: FeC alloy

Ridden and universally loved around the world, the Terry Fly is the kind of saddle you just don't think about. We've sold them to everyone from pro rider to Silicon Valley entrepreneurs. It's a favorite of RAAM riders and randonneurs, and has been hailed by journalists as the most comfortable saddles for men. The Fly Cromoly Gel version takes comfort up a level with the addition of a thin gel layer along the top, making this a wonderful saddle for endurance/distance riders. It's made in Italy, completely seamless, and contoured to support sit bones and relieve pressure in key areas. - Smooth Dura-tek with screen-printed accent - Completely seamless across saddle top to reduce the potential for chafing - Thin gel layer for added comfort - Center cutaway with rear relief channel that reduces contact points - Length x width: 277mm x 140mm - Weight: 321 grams; 11.3 ounces - Rails: FeC alloy

Our Raven saddle was designed using the latest in vacuum molding technology, allowing for a sleek, seam-free contact surface and clean integration with the saddle's substrate base. The benefit – no chafing, no hot spots. It has a narrow profile with dropped nose shaping in front that helps eliminate pressure and a flat rear that supports your sit bones. We've also achieved the ideal balance of foam padding with an ergonomic relief channel, making it a very comfortable option for those looking to minimize bulk. The Raven is a slightly longer saddle that gives you more fore-aft positioning range on the bike and it comes with a smooth, durable synthetic cover. - Smooth, matte black Dura-tek cover - Pressure relief channel - Drop nose design for comfort - Length x width: 265mm x 150mm - Weight: 275 grams; 9.7 ounces - Rails: Cr-mo

Our Topo mountain bike saddle for women takes everything we've learned about saddle comfort and tailors it to the specific needs of female mountain bikers. It's a sleek, low profile design with a narrower shaped, flat rear platform that aids in your climbing performance and quick rear dismounts. The center has one of our widest cutaways to increase comfort and eliminate pressure points. And what really defines Topo is the use of a durable, Fibra-tek with debossed topographic map of Vermont's Kingdom Trails. Made by hand in Italy. - Fibra-tek cover with a debossed topographic map of Vermont's renowned Kingdom Trails - Terry's signature cutaway through the center of the saddle for pressure relief - Length x width: 262mm x 150mm - Weight: 310 grams; 10.9 ounces - Rails: FeC alloy

Our Topo mountain bike saddle for women takes everything we've learned about saddle comfort and tailors it to the specific needs of female mountain bikers. It's a sleek, low profile design with a narrower shaped, flat rear platform that aids in your climbing performance and quick rear dismounts. The center has one of our widest cutaways to increase comfort and eliminate pressure points. And what really defines Topo is the use of a durable, Fibra-tek with a debossed topographic map of Vermont's Kingdom Trails. Made by hand in Italy. - Fibra-tek cover with a debossed topographic map of Vermont's renowned Kingdom Trails - Terry's signature cutaway through the center of the saddle for pressure relief - Length x width: 262mm x 150mm - Weight: 310 grams; 10.9 ounces - Rails: FeC alloy

The Falcon X is recommended for riders in search of fore/aft comfort and speed, and also has the distinction of being named an Editors' Choice by the testers at Bicycling. In addition to having a larger and longer cutaway than the Butterflies or FLX saddles, the Falcon has an inverted v-wing in the rear to provide a greater degree of flexibility and relief to the tailbone. Lightly padded overall with an elevated rear that gives riders a great perch for power climbs. Recommended for road and mountain biking. Hand made in Italy. - Black Dura-tek cover with seamless nose and screen-printed design - Terry's signature cutaway through the center of the saddle for pressure relief - V-wing relief channel at the rear - Length x width: 259mm x 152mm - Weight: 295 grams; 10.4 ounces - Rails: FeC alloy

The Raven Ti Gel saddle features strategically positioned gel under sit bones for an increased level of comfort. It was designed using the latest in vacuum molding technology, allowing for a sleek, seam-free contact surface and clean integration with the saddle's substrate base. The benefit – no chafing, no hot spots. It has a narrow profile with dropped nose shaping in front that helps eliminate pressure and a flat rear that supports your sit bones. We've also achieved the ideal balance of foam padding with an ergonomic relief channel, making it a very comfortable option for those looking to minimize bulk. The Raven is a slightly longer saddle that gives you more fore-aft positioning range on the bike and it comes with a smooth, durable synthetic cover. - Smooth, matte black Dura-tek cover - Pressure relief channel - Drop nose design for the front of saddle comfort - Strategically positioned gel under sit bones (O-zone) - Length x width: 265mm x 150mm - Weight: 266 grams; 9.38 ounces - Rails: CRN-Ti

For nearly three decades, Terry has been working with all levels of riders to solve all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. This Butterfly Galactic was designed to take comfort up a notch, in addition to giving you a ride that's out of this world. We've engineered it with our largest cutaway, and It comes as a limited edition in two color options with reflective ink constellation screen-print on the cover. Hand made by aliens in Italy. - Dura-tek cover with constellation screen-print in reflective ink - Widest cutaway in the Butterfly line up for maximum pressure relief - Length x width: 262mm x 155mm - Weight: 260 grams; 9.3 ounces - Rails: Manganese

Terry's FLX saddle offers the best in split saddle engineering. Perfected by our saddle partners at Selle Italia in Italy, this novel approach allows the saddle a small degree of additional flexibility in addition to relief channel comfort. If you find the Terry Butterflies are too wide or too padded, this saddle line is an excellent alternative. We recommend the FLX to elite riders who prefer a lightweight, lightly padded saddle, but with the Terry comfort factor dialed in. - Black leather with screen-printed graphics - Complete cutaway from front to back for added comfort and saddle flexibility - Length x width: 260mm x 142mm - Weight: 228 grams; 8 ounces - Rails: Manganese

Terry's award-winning FLX Gel saddle for women offers the best in split saddle engineering. Perfected by our saddle partners at Selle Italia in Italy, this novel approach allows the saddle a small degree of additional flexibility in addition to relief channel comfort. Additionally, the FLX Gel has a thin layer of gel on top of the foam base. If you find the Terry Butterflies are too wide or too padded, this saddle line is an excellent alternative. We recommend the FLX Gel to elite riders who prefer a lightweight, lightly padded saddle, but with the Terry comfort factor dialed in. - Perforated black leather with thin gel insert - Complete cutaway from front to back for added comfort and saddle flexibility - Length x width: 260mm x 142mm - Weight: 258 grams; 9.1 ounces - Rails: Manganese

For nearly three decades, Terry has been working with all levels of riders to solve all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. The Butterfly Ti has a textured leather cover that will wear beautifully over time and keep you solidly planted on the saddle. Wider in the rear than typical race saddles for good support of a woman's sit bones; completely cutaway through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with injection molded foam that's stiff enough to give you more power for pedaling. - Debossed butterfly graphic - Textured leather cover - Signature Butterfly cutaway through center of saddle for pressure relief - Length x width: 262mm x 155mm - Weight: 248 grams; 8.7 ounces - Rails: ti-316

The ultimate bike seat for men, tested and highly praised by journalists, raced on by pro riders, ridden and universally loved around the world. Introduced in 1999, the Italian-made Fly was a joint project between Terry and Selle Italia to develop the ultimate in a comfortable, performance-level saddle for men. The Fly Ti is flat across the top and more padded than your typical euro-style racing saddle with complete cutaway and precision-sculpted foam to relieve pressure against sensitive anatomy. You know you need it. - Black textured-leather cover wears beautifully over time and keeps you solidly in position - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Flat across the top with multi-density, injection-molded foam that's a bit stiffer in the rear for more power while pedaling - Length x width: 277mm x 140mm - Weight: 240 grams; 8.5 ounces - Rails: Ti-316 - Note: Check seatpost for compatibility as it may require an adapter kit (available from some seatpost manufacturers)

A wider center cutaway and the addition of gel along the top are the primary differentiators between this saddle and our classic Butterfly. The wider relief channel, combined with its contoured rear and thin gel layer, makes the Butterfly Ti Gel + extremely comfortable and ideal for endurance riders. Like all Butterflies, the Ti Gel + shares the basic construction characteristics. It's wider in the rear than typical race saddles for good support of a woman's sit bones. The top is flat and low profile, and we've used the ideal blend of stiffness/softness in the injection molded foam to allow for good support and power while pedaling. Outfitted with lightweight ti rails and hand made in Italy. - Leather cover with perforated Butterfly pattern - Thin gel layer along the top of the saddle provides an additional level of comfort - Widest cutaway in the Butterfly line-up for maximum pressure relief - Length x width: 262mm x 155mm - Weight: 255 grams; 9 ounces - Rails: Ti-316

Terry's longest distance, lowest profile, widest cutaway Butterfly with something extra: Poron XRD. Designed to take comfort up a notch for endurance riding, the Butterfly Century is engineered with a layer of Poron XRD shock absorbing material between the saddle’s base and foam layers. The Poron XRD reduces road shock and allows for a thinner layer of foam and a narrower overall saddle profile, without loss of rider comfort. A larger foam cutout provides greater soft tissue relief. Additionally, the Century features a thin layer of gel along the top, a wider cutaway, sculpted foam for pressure relief in key areas, and a seamless Fibra-tek cover that reduces the incidence of high cadence chafing. - Fibra-tek cover with Poron XRD shock-absorbing layer - Widest cutaway in the Butterfly line up for maximum pressure relief - Length x width: 262mm x 152mm - Weight: 268 grams; 9.5 ounces - Rails: Ti-316

In designing the Corta saddle for women, we endeavored to create an entirely new shape for performance riders whose riding style has evolved. Maybe you're more competitive, riding longer distances, or have a new bike that you can't get comfortable on – this snub-nose style saddle could be your solution. The Corta has a shorter overall length and a dropped nose which combine to eliminate excess surface area, prevent chafing, and alleviate pressure. We've also engineered it with our largest cutaway for the greatest relief channel possible. It's supportive and flat at the rear so you have a good platform for sustained, seated climbs. Aesthetically, the Corta is a streamlined beauty with textural detail and state-of-the-art technology. If you're ready to step up to the latest in technology, Terry comfort engineering, and high-performance design, Corta was made for you. - Seamless bond between Dura-tek cover and micro-suede panels provides a smooth contact surface to reduce chafing - Screen-printed graphics and perforations - Largest cutaway in the Terry saddle line - Length x width: 250mm x 149mm - Weight: 235 grams - Rails: Ti-316

The Butterfly Carbon is the lightest of the Butterflies thanks to the addition of carbon rails. It's wider in the rear than typical saddles for good support of a woman's sit bones. The Butterfly Carbon's low profile, flat top, and a complete cutaway through the center are designed to provide pressure relief and support in the right areas. Injection-molded foam is used to provide the right balance of softness and stiffness so you won't sink into the saddle the longer you ride. - Black leather with gloss butterfly graphic and patent leather rear - Signature Butterfly cutaway through the center of the saddle for pressure relief - Length x width: 262mm x 155mm - Weight: 218 grams; 7.7 ounces - Rails: lightest weight Carbon 10mm H (+/- .5mm) x 7mm W (+/- .5mm) note: check seat post for compatibility as it may require an adapter kit (available from some seat post manufacturers)

- Full 3K Carbon Base - Ultralight 140g - Our Signature Pure PU compound gives maximum grip in wet and dry conditions - Anatomic Intelligence (Ai) technology based on heavy R&D optimizes ergonomics and comfort - Ride experience: Road - Width: One Size

The World's Most Technologically Advanced Saddle Pad. Lifetime Weatherproof Guarantee. - Great Waterproof Cover - Figure-8 Drawstring For A Secure Fit - Friction-Free Gel - Cover Material: Weatherproof - Length: 247mm - Width: 182mm - Weight: 196g

When you ride everyday and race on the weekends, all the miles need to be comfortable. Selle SMP's Evolution sports their dropped nose design with a large open center channel that eliminates pressure on sensitive areas while still allowing full control in all conditions. The nylon shell is reinforced with carbon for added life and the stainless steel rails provide lightweight vibration damping. Light padding keeps you comfortable while the long rails provide ample fore/aft adjustment for the perfect fit.

Ellipse Athletic features a central anatomic hole for pressure relief and 3D Skingel to guarantee maximum comfort in the ischial and perineal areas. To guard against impacts and abrasions, the Ellipse also features Double Cover, a double-layer material applied to the sides of the saddle to double resistance against impacts and abrasions. Additionally, it has a patented clip system positioned at the rear of the saddle for easy attachment of a Selle Royal saddle bag or other accessories.

Ellipse Moderate Man is an elegant and anatomic saddle whose central hole is designed to reduce pressure in the perineal area. Royalgel technology ensures a high level of comfort and silver-colored side guards protect from bumps and scratches for longevity.

Ellipse Relaxed features a central anatomic hole for pressure relief and 3D Skingel to guarantee maximum comfort in the ischial and perineal areas. To guard against impacts and abrasions, the Ellipse also features Double Cover, a double-layer material applied to the sides of the saddle to double resistance against impacts and abrasions. Rear elastomers are added for better shock absorption — they're effective for even the most severe and unexpected shocks, and work both vertically and horizontally for safe, silent, and permanently non-deformable performance. A patented clip system is positioned at the rear of the saddle for easy attachment of a Selle Royal saddle bag or other accessories.

The S3 Flow maintains the typical style of a racing saddle, maximizing pedaling comfort on city streets. The gel inside the padding, together with the central hole, relieve pressure from the perineal area, increasing comfort without neglecting performance. The Hi-Viz inserts on the back of the seat ensure visibility and safety at night. - Comfortable saddle with a racing style - Flow anatomic cut-out reduces perineal pressure - Gel padding ensures comfort by adding flexibility in the center of the saddle and absorbing vibrations - Hi-viz reflective inserts on the back improves visibility and safety - Soft-Tek cover, made from a special molded polyurethane, guarantees high levels of comfort - FeC alloy rails, made from high-strength and flexible carbon-iron steel alloy - Selle Italia idmatch S2 - Dimensions: 272 x 140mm - 365g

The T2 Flow makes comfort its main feature. Its wide and ergonomic seat allows any person to ride comfortably, avoiding possible problems in the ischial area. The large layer of gel inside the padding, together with the central hole for relieving pressure from the perineal area, helps to increase comfort in every situation. The Hi-Viz inserts on the back of the saddle also ensure visibility and safety at night. - Wide and ergonomic seat designed to improve comfort - Flow anatomic cut-out reduces perineal pressure - Gel padding ensures comfort by adding flexibility in the center of the saddle and absorbing vibrations - Hi-viz reflective inserts on the back improves visibility and safety. - Soft-Tek cover, made from a special molded polyurethane, guarantees high levels of comfort - FeC alloy rails, made from high-strength and flexible carbon-iron steel alloy - Selle Italia idmatch L2 - Dimensions: 258 x 233mm - 671g

The T3 Flow makes comfort and ergonomics its main features. Its highly ergonomic seat, equipped with a gel, allows you to absorb any imperfections in the road and maximize comfort. The central hole also allows the seat pressure to be adequately relieved from the perineal area. The Hi-Viz inserts on the back of the seat ensure visibility and safety at night. - Wider, comfort saddle, ideal for more upright riding positions - Flow anatomic cut-out reduces perineal pressure - Gel padding ensures comfort by adding flexibility in the center of the saddle and absorbing vibrations - Hi-viz reflective inserts on the back improves visibility and safety - Soft-Tek cover, made from a special molded polyurethane, guarantees high levels of comfort - FeC alloy rails, made from high-strength and flexible carbon-iron steel alloy - Selle Italia idmatch S2 - Dimensions: 267 x 210mm - 480g

Comfort and performance within everyone's reach. The ST5 Flow is the perfect saddle for those looking for the right balance between performance and comfort on a daily basis. The Gel inserted inside the padding, together with the central hole, relieves pressure from the perineal area and maximizes comfort. The practically flat shape, on the other hand, ensures the same high level of performance as a racing saddle. Hi-Viz inserts on the back ensure visibility and safety at night. - Flow anatomic cut-out reduces perineal pressure - Gel padding ensures comfort by adding flexibility in the center of the saddle and absorbing vibrations - Hi-viz reflective inserts on the back improves visibility and safety. - Soft-Tek cover, made from a special molded polyurethane, guarantees high levels of comfort - FeC alloy rails, made from high-strength and flexible carbon-iron steel alloy - Selle Italia idmatch S2 / L2 - Dimensions: 276 x 155mm / 276 x 165mm - 396g (155mm) / 403g (165mm)

The ST3 Superflow is the saddle that maximizes pedaling comfort for longer use. Its anatomical design allows you to easily find your ideal seat, maximizing relief and performance. The gel inserted inside the padding, together with the central Superflow hole for relieving pressure from the perineal area, further increases comfort. The Hi-Viz inserts on the back ensure visibility and safety at night. - SuperFlow technology drastically reduces pressure in the perineal area - Gel padding ensures comfort by adding flexibility in the center of the saddle and absorbing vibrations - Hi-viz reflective inserts on the back improves visibility and safety - Soft-Tek cover, made from a special molded polyurethane, guarantees high levels of comfort - FeC alloy rails, made from high-strength and flexible carbon-iron steel alloy - Selle Italia idmatch S3 - Dimensions: 270 x 160mm - 406g

- The result of extensive anatomic study of ladies' saddles - Gel Flow features gel around the anatomic central relief area for maximum comfort - Shock-absorbing technology is used between the rails and the shell, which dampens vibration and helps absorb road shock - Leather top, perforated leather gel area covers - Manganese 7mm rail combines strength and affordability - 300g (135mm) / 310g (160mm)

Shell in Nylon12 and Carbon fiber make for superlative performance standards and wonderful weightlessness: 130 grams. This is as lightweight as it gets. This particular version bespeaks the sheer elegance of hand-upholstered products and the curated charm so typical of items leaving the Selle-Italia laboratories. - Reinforced edges for real-world durability - SuperFlow reduces physical limitations from prolonged pressure in the perineal area - Double-density padding for a softer tip offers ease of movement - High-density rear for stability while pedaling - Fibra-Tek microfiber cover - Ti 316 rails - Dimensions: 268 x 125mm / 268 x 140mm - 165g (125mm) / 175g (140mm)

- Lightweight racing saddle - SuperFlow technology drastically reduces pressure in the perineal area - Carbon infused shell ensures low weight and durability - Fibra-Tek cover, made from a strong, highly durable, and lightweight technical microfiber material - CarboKeramic rails, made from ceramic-coated carbon, offer low weight and superior clamping resistance - Weight: 148g

- Selle Italia's lightest short saddle - ''Boost'' short nose improves thigh clearance, saddle fit and reduces weight - SuperFlow technology drastically reduces pressure in the perineal area - Carbon infused shell ensures low weight and durability - Fibra-Tek cover, made from a strong, highly durable and lightweight technical microfiber material - CarboKeramic rails, made from ceramic-coated carbon, offer low weight and superior clamping resistance - Selle Italia idmatch S3 / L3 - Weight: S: 122g, L: 129g

- Embossed top cover - Plastic bumpers - Pivotal system - Clamp Style: Pivotal - Material: Vinyl

Saddle Rail Clamp outer-pieces to adapt WCS Alloy 1-bolt posts to various saddle rail dimensions. - To retrofit WCS 1-Bolt alloy seatpost - Material: 7050 alloy

Settle in for a comfortable ride experience. Without sacrificing performance, the Comp Streem Saddle features Ritchey's revolutionary patented Vector Wing technology, which helps eliminate hot spots by dissipating pressure more evenly for all-day comfort wherever your pedal strokes take you. With steel rails, a more slender nose, and medium padding, the Comp Streem employs a low-profile design and features a synthetic leather cover. - Saddle Dimensions: 278 x 145mm - Lightweight foam - Patented Vector Wing structure - Rails: Steel - Rail Dimensions: 7x7mm - Shell: Nylon + glass fiber - Cover: Synthetic leather - 250g (132mm)

Traditional style for modern ride experiences. As its name suggests, the Ritchey Classic saddle combines a timeless aesthetic with welcome comfort and the performance that Ritchey is known for. Completely redesigned, the new Classic saddle features a stylish Ritchey synthetic leather-like cover with subtle debossed Ritchey logos that couples well with its traditional shape—a wide tail and gradual taper toward the nose. Beneath the cover sits a layer of high-density polyurethane foam for just the right amount of cushioning, while Ritchey's revolutionary patented Vector Wing technology helps eliminate hot spots by dissipating pressure more evenly. With good looks, modern materials, and wise comfort, the new Classic saddle is sure to add a touch of class to all of your rides. - Vector Wing design - Dimensions: 278x142mm - Rails: steel - Rail dimensions: 7x7mm - Shell: Nylon + glass fiber - Padding: polyurethane foam - Cover: perforated synthetic leather - Weight: 330g

The new Comp Skyline saddle keeps the ergonomic curve that supports sit bones and the generous cutout to relieve perineal pressure of the original Skyline but updates it with new construction for more durability, better aesthetics and a lighter weight. Built with a unique manufacturing technology that adheres the saddle cover to the base without any visible seams, glue, stitching, or staples, the new Comp Skyline is now waterproof, will last longer, and keeps the weight low. The saddle padding is made from a new polyurethane material that is 30% more shock absorbent than traditional foam, which reduces rider fatigue. Like the original, the new Comp Skyline features a curved, two-axis shape that brings a rise toward the rear of the saddle and a bit of lift to the nose. This shape is ideal for riders who lack flexibility and want more support, yet still offers a good position for riders who demand a healthy dose of performance with their comfort. Another highlight of the Skyline is Ritchey's revolutionary patented Vector Wing technology, which helps eliminate hot spots by dissipating pressure more evenly for all-day comfort for wherever your pedal strokes take you—road, gravel, trails, and beyond. - Vector Wing design - Curved, two-axis shape - Seamless cover & shell integration - Dimensions: 277x147mm - Rails: Cr-Mo - Rail dimensions: 7x7mm - Shell: Nylon + glass fiber - Padding: polyurethane foam - Cover: Ritchey synthetic upper - Weight: 265g

The new WCS Skyline saddle keeps the ergonomic curve that supports sit bones and the generous cut-out to relieve perineal pressure of the original Skyline but updates it with new construction for more durability, better aesthetics, and a lighter weight. Built with a unique manufacturing technology that adheres the saddle cover to the base without any visible seams, glue, stitching, or staples, the new WCS Skyline is now waterproof, will last longer, and keeps the weight to a minimum. The saddle padding is made from a new lightweight polyurethane material that is 30% more shock-absorbent than traditional foam, which reduces rider fatigue. Like the original, the new WCS Skyline features a curved, two-axis shape that bring a rise toward the rear of the saddle and a bit of lift to the nose. This shape is ideal for riders who lack flexibility and want more support, yet still offers a good position for riders who demand a healthy dose of performance with their comfort. Another highlight of the Skyline is Ritchey's revolutionary patented Vector Wing technology, which helps eliminate hots spots by dissipating pressure more evenly for all-day comfort for wherever your pedal strokes take you—road, gravel, trails, and beyond. - Vector Wing design - Curved, two-axis shape - Seamless cover & shell integration - Dimensions: 277x147mm - Rails: stainless steel - Rail dimensions: 7x7mm - Shell: Nylon + carbon fiber - Padding: super-light polyurethane foam - Cover: premium Ritchey synthetic upper - Weight: 227g

Settle in for a remarkably comfortable ride experience. Without sacrificing performance, the WCS Streem saddle features Ritchey's revolutionary patented Vector Wing technology, which helps eliminate hot spots by dissipating pressure more evenly for all-day comfort wherever your pedal strokes take you. The WCS Streem enjoys a low-profile design and narrow, carbon fiber-injected shell for stiffness and light weight, along with hollow titanium rails, super light foam padding, and a Microfiber cover. - Saddle Dimensions: 278 x 145mm - Superlight foam - Patented Vector Wing structure - Rails: CrN/Ti - Rail Dimensions: 7x7mm - Shell: Nylon + carbon - Cover: Microfiber - 200g

The Skyline is the newest addition to the Ritchey saddle lineup and features carbon rails, an ergonomic curve that supports the sit bones, and a generous cutout to relieve perineal pressure. Its curved, two-axis shape features a rise towards the rear of the saddle and some rise into the nose of the saddle, making this shape ideal for riders who lack flexibility and want more support. - Vector Wing design - Dimensions: 277x147mm - Rails: carbon fiber - Rail dimensions: 8x8.5mm - Shell: Nylon + carbon fiber - Padding: superlight polyurethane foam - Cover: premium Ritchey synthetic upper - Weight: 184g

Settle in for a remarkably comfortable ride experience. Without sacrificing performance, the WCS Carbon Streem saddle features Ritchey's revolutionary patented Vector Wing technology, which helps eliminate hot spots by dissipating pressure more evenly for all-day comfort wherever your pedal strokes take you. The WCS Carbon Streem enjoys a low profile design and narrow, carbon fiber-injected shell for stiffness and light weight, along with carbon fiber rails, super light foam padding, and a Microfiber cover. Notes: - If used in conjunction with our SuperLogic or WCS Carbon 1-Bolt Seatposts, you will need the 8x8.5mm Carbon Clamp Kit - If used in conjunction with our WCS Alloy 1-Bolt Seatposts, you will need the 8x8.5mm Alloy Clamp Kit - Saddle Dimensions: 278 x 145mm - Superlight foam - Patented Vector Wing structure - Rails: Carbon fiber - Rail Dimensions: 8x8.5mm - Shell: Nylon + carbon - Cover: Microfiber - Available in black or white - 145g (132mm)

The soft ride of a sprung saddle in a sportier package than the step-through's. This is the saddle that comes stock on every Pure City Classic Series, making it the perfect upgrade or replacement for the city bike in your life.

The name Dimension contains the importance of the project itself: to create an innovative product in terms of size, design and ergonomic shape suitable for all disciplines and perfect for men and women. Dimension is comfort, performance and lightness. The combination of short nose (35mm less than a traditional saddle) and PAS system ensures blood flow and pressure relief, ensuring comfort even in aerodynamic position or maximum pushing phase. - Rail Material: Ti-Rox - Clamp Style: Standard Rails - Material: Synthetic - Length: 245mm - Width: 143mm - Weight: 208g

The Dimension Space is designed to fit riders that need a semi & round shape, with "medium-low pelvic rotation/flexibility and wider ischial bone distance. The Special Channel we call "PAS" (wider and deeper) eliminates numbness and reduces the compression of soft tissues, improving blood flow in the pelvic area. The extra 7mm of padding with special density foam and 153mm width ensures better comfort for longer rides. Prologo has created this product for women and men with a greater distance between the ischial bones that therefore require a wider saddle. This saddle is focused on extra comfort for the all-round rider and all genders. - Rail Material: Ti-Rox - Clamp Style: Standard Rails - Material: Synthetic - Length: 245mm - Width: 153mm - Weight: 200g

Dimension Tri is a saddle born for triathlon and time trial users, improving comfort in all pedaling phases thanks to the ergonomic “V SHAPE” shape. Along with the PAS channel, these devices guarantee a better blood flow eliminating numbness and excessive pressure. - Multicategory saddle suitable for time trial and triathlon users, but also road and off-road - Tirox is a light alloy steel with a standard round size of 7 mm - Injected carbon base - Light padding with a microfiber cover - Rail Material: Ti-Rox - Clamp Style: Standard Rails - Material: Synthetic - Length: 245mm - Width: 143mm - Weight: 223g

The Prologo Scratch M5 PAS uses innovative technology in terms of size, shape, and ergonomics, and is suitable for many uses and disciplines. Thanks to the new design, size, and ergonomic "T-Shape," Scratch M5 is suitable for men and women. The new MSS Multi Sector System improves comfort and performance, and the active foams that separate from each other create 5 mapped zones that work individually, supporting normal pedaling movement both during the pushing and pulling phases. The round shape of the Scratch M5 allows the pelvis to rotate naturally, creating stability and support for the lumbar areas. Despite the absence of a channel, the open base is able to eliminate pressure peaks. The PAS is a channel designed to eliminate pressure peaks and numbness, improving blood flow. Its particular ergonomic design, assisted by variable density foams, eliminates contact points and is ideal for users who prefer performance combined with comfort over long and medium distances. - Ergonomic multi-category saddle - Round shape increases sitting area and better support to the pelvic zone - Tirox is a light alloy steel with a standard round size of 7 mm - Long carbon-fiber base - Light padding with a microfiber cover - Multi Sector System (MSS) features individual zones mapped and separated along the saddle, each composed of different interactive foams and single-cell padding - Clamp Style: Standard Rails - Material: Synthetic - Length: 250mm - Width: 140mm - Weight: 185g

The Mike Aitken signature BMX seat is a stylish and durable, that's tear and scuff resistant.

- ComfortRide Gel Padding - 4-Way Strech Breathable Cover - Anatomically designed for pressure relief - GripRight Non-Slip System - Drawstring Closure - 249-274mm x 140-165mm

- ComfortRide Gel Padding - 4-Way Strech Breathable Cover - Anatomically designed for pressure relief - GripRight Non-Slip System - Drawstring Closure - 254-280mm x 178-203mm

- ComfortRide Gel Padding - 4-Way Strech Breathable Cover - Anatomically designed for pressure relief - GripRight Non-Slip System - Drawstring Closure - 229-254mm x 216-241mm

- ComfortRide Gel Padding - 4-Way Strech Breathable Cover - Anatomically designed for pressure relief - GripRight Non-Slip System - Drawstring Closure - 244-269mm x 254-279mm

- ComfortRide padding - Vacuum sealed water-resistant SVT Cover - NiteSite reflective accents - FullCut Relief Zone